|
Archive of For Sale Forum Old Common For Sale Forum (Temporary) |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
parting 2000 ec200/300
parting complete 2000 xc300 - was a 200, now with 300 motor.
here's a pic - not current - some plastics have changed, and some other things. i have tons of yellow plastics though - from NOS to ratty and destroyed. wp forks/shock, valved by ltr for 190lb b/c rider-rocks-roots-mud - h/s and gncc here's an updated price list: parts on this list are available now. these prices include shipping to the USA . international is more. 2000 excel front wheel (no rotor) $125 forks (wp) valved by ltr (feb 2010)- 190lb b/c rider. with .42 spring $250 (revalve and springs alone costs more than this...) ohlins shock valved by ltr (feb 2010) - 190lb b/c rider. $150 - 5.2 spring (if you're above 170 need 5.4 spring...) front brake master+lever+stainless line $50 front caliper (nissin) $40 rear brake master+reservoir $40 rear caliper+carrier+stainless line-brembo - will fit all models - may need spacer washer for newer models (i will include if needed) $70 swingarm (new bearings with 8 hours on them) $75 swingarm pivot bolt (new nut) $25 122mm ltr links $50 cdi (200cc) works nice for all models - not dual map. $100 ignition coil $30 triple trees with billet checkpoint top triple (this has 5 or 6 position adjustable bars - very neat) (1-1/8" bars) $100 Seat (99) blue factory cover, in excellent condition. will not fit 00 or newer. $50 seat (00) has been recovered - cover has tear or ten. foam is decent. this is the 'lower/wider' seat $40 complete clutch modified for cr250 plates, with new cush, basket drilled for oil flow.. complete with milled spacer, hub/basket/nut/plates (newish). everything you need. never squawked. $100 clutch master/slave/lever - rubber boot in master pluger is loose, but this works fine. rebuilt 1 year ago. $50 front axle + nut (wp) $20 WER damper + mount $125 gnarly pipe no guard (from an 07 300) - has big dings $75 gas tank (04 i believe - has the recessed trials type cap- not the one pictured!) $65 ALSO AVAILABLE: 99 forks (right side ups) $125 99 triple tree (right side ups) $50 aluminum subframe (needs welding - has repairs) $40 99 300 bottom end (doesn't shift - haven't investigated) $200. no ignition. 00 200 cases and crank $150 various yellow plastics - some in excellent condition .40 wp springs (i think..) - for under 160lb rider... i cannot remember rate, but i know they were too light for me. $40
__________________
07 ec300 was 00 xc200 now a 00 xc300. now parting out. 99 ec300 (now a pile of parts which are for sale) Stainless Cycle - Motorcycle Bolt Kits www.stainlesscycle.com Last edited by stainlesscycle; 03-20-2012 at 05:31 AM. |
#2
|
|||
|
|||
pm sent....
|
#3
|
||||
|
||||
Rear disc guard?
Kickstand?
__________________
Believe nothing, no matter where you read it or who has said it, not even if I have said it, unless it agrees with your own reason and your own common sense. [Buddha] |
#4
|
|||
|
|||
Ec300
How much for the engine complete? email 250r@borderlandnet.net thanks
|
#5
|
||||
|
||||
not selling motor top end (cylinder/piston/head). if you want complete bottom end w/ignition (2k2) and kicker, let me know
__________________
07 ec300 was 00 xc200 now a 00 xc300. now parting out. 99 ec300 (now a pile of parts which are for sale) Stainless Cycle - Motorcycle Bolt Kits www.stainlesscycle.com |
#6
|
|||
|
|||
tank, seat, and all plastics
I am interested in the tank, seat, air box, and all the plastics. I have sent ya a pm on it.
__________________
Jeff Bamman 1998 250EC 1999 200EC 2008 FLHX Street Glide |
#7
|
||||
|
||||
Sent you a PM
__________________
13 EC300 90 XR280 600cc Custom Snowbike |
#8
|
||||
|
||||
I'll take the pipe, check your pm's
__________________
13 EC300 90 XR280 600cc Custom Snowbike |
#9
|
||||
|
||||
updated prices. lost some previous pm's. please resend.....
__________________
07 ec300 was 00 xc200 now a 00 xc300. now parting out. 99 ec300 (now a pile of parts which are for sale) Stainless Cycle - Motorcycle Bolt Kits www.stainlesscycle.com |
#10
|
||||
|
||||
I am interested in these items if they are still available and they fit my 99 and 97 models:
2000 excel rear wheel (no rotor or sprocket) $175 (I assume this fits a 99) forks (wp) valved by ltr (feb 2010)- 190lb b/c rider. .42 spring $250 ohlins shock valved by ltr (feb 2010) - 190lb b/c rider. $150 (I assume this fits a 97) triple trees with billet checkpoint top triple (this has 5 or 6 position adjustable bars - very neat) (1-1/8" bars) $100 (I assume this will fit a 97 and has all the bearings) Will send a PM if I can figure out how that works and what it means. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
EC200 kick start lever (2000 model) | sireid | Enduro Chassis & Body | 11 | 01-24-2010 02:56 AM |
which reeds/cage are best for ec200 2000? | stainlesscycle | General Discussions & Announcements | 1 | 08-15-2009 04:56 PM |