parting out an 03 ec250

[101racing]

Do you have the boyesen rad valve reeds ? Thanks

[lordfeyr]

Do you have any of the pre-conversion plastics? Are they red or blue? Do you happen to have a blue or black air box cover, front fender brace or a black front number plate?


I looking for a bunch of plastic parts for my 04 ec 300

[mxdj2003]

all i have left is a frame and a subframe

[jprh]

sent u the paypal last week for the rear subframe howd u go .cheers in my wifes name nicole reynolds.

[whodat]

do you have the kickstand?

[mxdj2003]

JPRH i just emailed you the tracking no. , sorry kickstand is gone

[SpeedyManiac]

Still have the linkage? I'm looking for the brackets that connect the linkage to the frame and swingarm pivot.

[blueberry]

I was curious if SC issues title for the bike. I am trying to plate my california ec and would consider buying an out of state frame that has a motrorcycle frame with title that I could transfer to street. Also do you have the frame VIN number handy?

Thanks you

Originally Posted by mxdj2003

complete motor, with 300cylinder, ltr pv cover, and ignition and hydraulic clutch assy. motor needs new clutch plates, but i did install new rubber cushions in the clutch basket 600.00
07 subframe set up , everything to convert your bike to the new tail , all parts are brand new, execpt for the air boot includes a new seat 500.00
stock triple clamps, powered coated gloss black, never been on the bike 50.00
stock frame powder coated gloss black 150.00
brand new shift lever 15.00
swing arm painted black with new bearings and seals 50.00
radiators in very good shape with hoses and moose guards 200.00
shock valved for A rider with stock spring 100.00
cr style chain guide conversion 20.00
WP front forks needs seals 150.00
clarke oversize tank with petcock 100.00

[GAS GAS UNLIMITED]

pm me if you still have the frame and the title, i am interested , thanks

[slocalspode]

Now this just my opinion, but, be careful thinking you can buy an
out-of-state street titled frame and get your EC converted in Ca.
I'm thinking we've missed the boat getting a "non-EPA" certified
bike platted in Ca.
We just went through this with my GF's Street platted (in NY)
Pampera. The VIN inspector failed her bike's inspection because
it did not have a Federal EPA certification tag on the frame.
She was given a waver form to have the bike inspected and
certified by the Ca. Highway Patrol. I know this is not going
to go well. Every time I have been to the CHP, they have been
rude, arrogant, butt heads. I know it is their job to interpret the
Ca. Vehicle code and follow the rules, but, rude is rude. Plus it
takes 2 months to get an appointment for a vehicle inspection.
Like I said this is only my opinion and we are presently going through
the process of trying to street title a 2-stroke bike in Ca.
I'll post our results in a couple months.
Good luck. Jeff So. Cal.
--------------------------------------------------------------------
BlueBerry wrote:
"I was curious if SC issues title for the bike. I am trying to plate my california
ec and would consider buying an out of state frame that has a motrorcycle
frame with title that I could transfer to street. Also do you have the frame
VIN number handy?"