Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 03-30-2018, 02:54 PM
Chris_tian Chris_tian is offline
Member
 
Join Date: Jan 2017
Location: Germany
Posts: 17
Default Ec300 Model 2017 power valve

Hello,

can anyone tell me how to adjust the power valve on my 2017 EC300

In the manuel there are no information about the system.

What is the factory setting and wich one is the best?


Reply With Quote


  #2  
Old 03-30-2018, 04:20 PM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,113
Default

You may take a look in the '15 manual. It describes both how to adjustable and the standard setting for each motor displacement.
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #3  
Old 04-01-2018, 12:03 PM
Chris_tian Chris_tian is offline
Member
 
Join Date: Jan 2017
Location: Germany
Posts: 17
Default

Thank you!!
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
EC300 power valve's left cover assembly question Rampart Enduro Engine - 2 stroke 3 03-27-2017 12:12 AM
Ec300 rattle/power valve issue Smithwoodwest Enduro Engine - 2 stroke 6 12-22-2016 07:46 PM
2001 ec300 power valve free play krazy Enduro Engine - 2 stroke 1 09-26-2015 04:26 AM
'14 EC300 Power valve not opening poelinca Enduro Engine - 2 stroke 9 09-17-2015 02:58 PM
Loss of power - suspect power valve Jonny Halls Enduro Engine - 2 stroke 4 01-22-2013 09:56 AM




All times are GMT -5. The time now is 04:30 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org