|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Help for a newbie?
I'm new to two strokes and I just picked up a 2005 EC200. The bike seems to start and run pretty good other than an off idle sputter, but is smoking very heavily. I've verified that my mix is 50:1. After doing some research on this forum, I think I'm running way too rich. The bike has a 52 pilot, 175 main, NEHW (a bit of a guess, a little hard to read) needle, and a #5 slide. The main jet looks close to what others here are running, but I see nobody with a 52 pilot or #5 slide. Pilots are cheap, I'll order a 42 and 45 to try, but am I going to get anywhere with this slide? Should I bite the bullet and buy a #7? I have no history of this bike, but have reason to believe it hasn't been ridden in a year or more. I ride Michigan single track, and want to optimize the low end. Thanks for any advice.
|
#2
|
|||
|
|||
A 52 pilot is ridiculous.
Go for 42 pilot, number 6 or 7 slide and a 180 main. That should get you in the ballpark. |
#3
|
|||
|
|||
Do a search for username "Pobit" his jetting for the 200 worked great.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Newbie here! | redswr | General Discussions & Announcements | 9 | 09-15-2010 08:20 PM |
Newbie FAQ | Brian | Suggestion Box | 0 | 01-27-2010 01:35 PM |
newbie needs some help!!! | sandking11 | Enduro Suspension | 4 | 01-14-2009 07:36 AM |
Newbie | scotty84 | United Kingdom | 4 | 12-13-2008 04:42 PM |
newbie | thenutt | General Discussions & Announcements | 2 | 10-29-2008 04:57 PM |