|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Landing wires on 2011 starter
My 11' 300ec has been disassembled for 3 years in the garage and i'm putting it back together. Pretty sure I'm right with the connections, just wanted to check before I hit the start button.
|
#2
|
||||
|
||||
Yup, starter connections are correct
__________________
2021 Beta 300RR 2014 Gasgas XC300R 2019 850 Pro RMK |
#3
|
||||
|
||||
thanks...
|
#4
|
|||
|
|||
Did you update the bendix ever? Would be a good time to do it
__________________
2011 ec250 all the scorpion racing goodies, fmf gnarly, lector carb, fully setup for hare scrambles. |
#5
|
|||
|
|||
Hi....there are three wires going to the starter. They are attached to two terminals. The enormous hot terminal has two wires, one is a huge red wire from the battery, another is a more modest red wire that has a dark fusible connection in it that goes to the alternator. The third wire goes to the starter solenoid winding and it is Purple.
Schematics don't show any dark white striped wire going to the starter. The starter ground is through the motor square and the motor ground link that goes between the motor and the edge. Notwithstanding, there is a dark white striped wire that goes from the ECM/MAF Splice at J106 and goes to G106 on the motor square behind/over the starter. On the off chance that your alternator yield is perusing zero you need to check the wiring going among it and the starter hot lead and any associations with the ECM. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2011 starter voltage question | gasser | Enduro Electrical & Wiring | 1 | 05-07-2020 07:51 AM |
look for eletric starter kit EC300 2011 | adelino | "Wanted to Buy" & "Want To Trade" | 0 | 03-02-2016 01:05 PM |
2011 EC300 - Starter Won't stay engaged | Timbre | Enduro Electrical & Wiring | 8 | 03-25-2015 09:55 AM |
Starter question 2011 EC300 | iamovru | Enduro Electrical & Wiring | 3 | 02-17-2014 12:01 PM |
Clay, i have a WTF starter question on EC 300 2011 | rgranger | General Discussions & Announcements | 15 | 11-09-2013 12:20 PM |