Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 04-29-2021, 06:41 PM
GGracing GGracing is offline
Member
 
Join Date: Apr 2021
Posts: 1
Default '17 ec300 stator specs

I am trying to locate specs for the stator- I found a service manual for an 18 which I believe still has the Kokusan 2K-3 stator but none of the color coding matches plus I have a RED/BLUE lead that has been taped off. Has anyone come across this odd colored harness? I'll try and put attachments of photos.
Thanx
Attached Images
File Type: jpg ggwiring1.jpg (124.2 KB, 23 views)
File Type: jpg ggwiring2.jpg (118.6 KB, 22 views)


Reply With Quote


  #2  
Old 04-30-2021, 12:20 PM
Neil E. Neil E. is online now
Senior Member
 
Join Date: Mar 2007
Location: Gormley, Ontario, Canada
Posts: 1,424
Default

I'm not sure what you are asking. Pic 1 shows a pink/brown/white connector. Pic 2 shows two connectors red/blue and white/brown/yellow. Are all these disconnected on your bike? Or did you unplug them to take photos?

I expect all GG bikes use the 2K3 stator, but with different wiring looms depending on the year and model. Some bikes use AC powered CDIs and some use DC powered CDIs.

The 2K3 probably has a 75W output although I haven't seen published specs.
__________________
2011 EC250E
Reply With Quote
  #3  
Old 04-30-2021, 08:46 PM
Neil E. Neil E. is online now
Senior Member
 
Join Date: Mar 2007
Location: Gormley, Ontario, Canada
Posts: 1,424
Default

If pic 2 comes from the stator (wires exit the engine case at 2:00 o'clock) the red/blue wires are probably the larger "single winding" on the stator. This is the impulse coil that powers an AC CDI. You likely have a DC CDI so these wires are not used.

Is pic 1 is the female connector that pic 2 male connector plugs into? If so those wires are for the lighting coils.
__________________
2011 EC250E
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2018 Ec300 Jetting Specs Mud-Ectomy Enduro Intake/Carburetion - 2 stroke 53 11-17-2021 01:48 PM
Confirm Torque Specs for Forks/Linkage for 2018+ EC300? Booki Enduro Suspension 13 06-07-2019 08:34 PM
'06 EC300 stock handlebar specs? brider Enduro Chassis & Body 0 09-16-2013 03:08 PM
2010 EC300 Factory Jetting Specs - WTF? JP4 Enduro Intake/Carburetion - 2 stroke 197 07-04-2011 11:03 AM
2010 Sachs fork factory compression stack specs(ec300) bergerhag Enduro Suspension 9 07-01-2010 11:18 PM




All times are GMT -5. The time now is 03:22 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org