|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
still having brake issues
Hi ive been having, what I thought was bleeding issues on my front brake, ive replaced the mater cylinder piston and still nothing so I replaced the master cylinder and put the new piston in. and still nothing.
I found the hose to be damaged and have just replaced that this weekend ive tried to bleed it up and syringe it and bleed it and syringe it and the bloody thing wont hold decant pressure. oh ive replaced the caliper piston seals too. what im noticing that when I pump the leaver letting the piston come out a bit , there coming out wet. (personally I think they should be dry) wipe them push em in and they come out wet???? so do I need new ones grant
__________________
03 ec300 honda cr500 94 |
#2
|
||||
|
||||
Hey Grant,
What was the symptoms you were having prior to rebuilding it?
__________________
Blanco Current ride: 2009 WR450 Previously owned: 12 Gas Gas XC300R, 06 WR450, 06 YZ250, 05 Gas Gas EC250, 05 KTM 450EXC, 02 KX250 w/EG310 kit, 03 YZ250F |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
300 running issues | Jon250 | Enduro Intake/Carburetion - 2 stroke | 37 | 09-15-2013 05:10 PM |
02 450 FSE issues | wakeymatt | Enduro Engine 4 stroke (including EFI & Exhaust) | 12 | 08-20-2012 02:33 PM |
Water issues | Biff | Enduro Other... | 8 | 03-16-2011 11:00 AM |
shiftin issues... | Cruiser | Enduro Engine - 2 stroke | 3 | 11-23-2009 07:36 PM |
Kickstarter issues | roostafish | Enduro Engine - 2 stroke | 4 | 07-08-2007 05:47 PM |