Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 10-06-2018, 02:24 PM
Rampart Rampart is offline
Member
 
Join Date: Mar 2017
Posts: 92
Default is it normal? right power valve cover EC300

https://youtu.be/qBF5b0GxLQQ

looks like it have some free play ?!



Last edited by Rampart; 10-06-2018 at 03:28 PM.
Reply With Quote


  #2  
Old 10-06-2018, 05:00 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

Some free play is normal.
It can be adjusted out. Do a search on power valve adjustments.

By the way.
Avoid moving the power valve lever like you're doing.
Sometimes the governor balls can become dislodged.
Reply With Quote
  #3  
Old 10-08-2018, 02:16 PM
Rampart Rampart is offline
Member
 
Join Date: Mar 2017
Posts: 92
Default

can't find anything about its adjustment
Can someone help?
Reply With Quote
  #4  
Old 10-08-2018, 04:52 PM
eralha eralha is offline
Senior Member
 
Join Date: Sep 2018
Posts: 103
Default

https://www.youtube.com/watch?v=hmz9cij6MVY

this guy explained it realy good, you just need to adjust the knob that touches the governor, to remove free play.
Reply With Quote
  #5  
Old 10-08-2018, 05:02 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

Here also.
http://gasgasrider.org/html/pv_disassembly.html
Reply With Quote
  #6  
Old 10-09-2018, 11:37 PM
Rampart Rampart is offline
Member
 
Join Date: Mar 2017
Posts: 92
Default

I'm understood, thank you!
Reply With Quote
  #7  
Old 10-13-2018, 06:48 PM
Rampart Rampart is offline
Member
 
Join Date: Mar 2017
Posts: 92
Default

Hello friends
So I adjusted my PV.
And here is the result I got.

https://youtu.be/nY0fq1kaNJE

Should this slider reach the top bolt?
In the video, it does not reach the end, the valve is closed by about 2 mm in this position. But it should be noted, I think I did not reach the max rpm, because I could not warm up the bike well, and it was very rich.
Reply With Quote
  #8  
Old 10-15-2018, 06:06 AM
Rampart Rampart is offline
Member
 
Join Date: Mar 2017
Posts: 92
Default

Has a ride yesterday, it looks like it is necessary to change jets, I did not understand this because of this edjust of PV, but it seemed that there was not enough power at max revs. At the same time, it seems good pulls at low.
Reply With Quote
  #9  
Old 10-15-2018, 09:29 AM
eralha eralha is offline
Senior Member
 
Join Date: Sep 2018
Posts: 103
Default

what year is your bike? does it have the preload tensioner?

this mechanism: https://www.youtube.com/watch?v=lu3T-ctnzKY

if it have maybe it has some preload and not letting the PV full open.

Mine has that mechanism, and i have some tension on my PV so it does not fully open, and as a result i have more low end power, losing some top end power wich i dont need any way.
Reply With Quote
  #10  
Old 10-15-2018, 01:28 PM
Rampart Rampart is offline
Member
 
Join Date: Mar 2017
Posts: 92
Default

Quote:
Originally Posted by eralha View Post
what year is your bike? does it have the preload tensioner?

this mechanism: https://www.youtube.com/watch?v=lu3T-ctnzKY

if it have maybe it has some preload and not letting the PV full open.

Mine has that mechanism, and i have some tension on my PV so it does not fully open, and as a result i have more low end power, losing some top end power wich i dont need any way.
2011 and there is no such mechanism.
It seems that I did such a preload when i adjust my PV ...
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
EC300 suddenly low on power but then returns back to normal Mika Enduro Engine - 2 stroke 3 11-13-2017 01:01 PM
LTR Power valve cover skid jackson Enduro Product Reviews 22 09-04-2017 02:42 PM
EC300 power valve's left cover assembly question Rampart Enduro Engine - 2 stroke 3 03-27-2017 12:12 AM
LTR power valve cover $40.00 GAKLX Parts 6 10-04-2013 09:42 AM
LTR power valve cover Bailey28 Enduro Engine - 2 stroke 11 02-16-2011 04:23 AM




All times are GMT -5. The time now is 08:46 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org