|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Steering bearing differences...
Can anyone tell me what the difference is between steering bearings pre and post 06? I'm trying to fit my 06 triple clamp to an 02 bike and the bearings won't seat all the way. Trying to figure out which set to buy...
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#2
|
|||
|
|||
Go to this website and enter the two different model year bikes. You'll see that one of the two bearings is different between the years. Can't remember if it's the upper or lower...
http://partsfinder.onlinemicrofiche....artsfinder.htm |
#3
|
|||
|
|||
2006 bearings fit fine. God know what ones were on there!
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need steering head bearing info.. | GGRider01 | Enduro Chassis & Body | 0 | 11-19-2015 03:06 PM |
Steering head bearing question | LAWMAN | Enduro Chassis & Body | 17 | 11-28-2011 05:30 PM |
what steering bearing 1995 jt25 | jt25 | Enduro Chassis & Body | 0 | 11-09-2011 02:06 PM |
steering head bearing #'s | Cruiser | Enduro Chassis & Body | 4 | 04-18-2010 08:13 AM |
Steering Head Bearing Replacement... | tprnottp | Enduro Suspension | 7 | 10-30-2006 08:45 PM |