Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 11-20-2018, 07:45 AM
GASGASCWB GASGASCWB is offline
Senior Member
 
Join Date: Sep 2018
Posts: 101
Default Power valve covers???

Hi guys!

I have a question:

The "BIG" POWER VALVE COVERS works?

How?

For low, mid or high rotations?

I see this 2 options:

https://www.enduropuro.it/shop/en/ga...ng-gasgas.html


https://gasgaspartshouse.com/shop?ol...wervalve-cover

Both fits on new GASGAS EC300 2018?

No other mods need to gain any performance?

Just PLUG&PLAY?

Best wishes.


Reply With Quote


  #2  
Old 11-20-2018, 08:03 AM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,113
Default

Quote:
Originally Posted by GASGASCWB View Post
Hi guys!

I have a question:

The "BIG" POWER VALVE COVERS works?

How?

For low, mid or high rotations?

I see this 2 options:

https://www.enduropuro.it/shop/en/ga...ng-gasgas.html


https://gasgaspartshouse.com/shop?ol...wervalve-cover

Both fits on new GASGAS EC300 2018?

No other mods need to gain any performance?

Just PLUG&PLAY?

Best wishes.
Plug and play. Will increase torque at low revs.
You may also use a spacer behind the original cover.
https://www.motocrosscenter.com/shop...red-11896.html
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #3  
Old 11-20-2018, 11:18 AM
eralha eralha is offline
Senior Member
 
Join Date: Sep 2018
Posts: 103
Default

Didnt know about this, does it realy work?

Does it mean more torque on lows and mids?

Cheers.
Reply With Quote
  #4  
Old 11-20-2018, 02:56 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

The theory makes sense.. people like em.

I don't know if you'd see anything much on a dyno with it..

In saying that I have a 8mm spacer between my cylinder and the OEM cover, which I have taken from my 13 to my 18 model.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Power Valve ? BigAl Enduro Engine - 2 stroke 4 01-05-2015 09:08 PM
Loss of power - suspect power valve Jonny Halls Enduro Engine - 2 stroke 4 01-22-2013 09:56 AM
power valve nut bonkeye Enduro Engine - 2 stroke 4 10-11-2012 06:40 PM
LTR power valve covers for GG2011 Gary Hill General Discussions & Announcements 44 04-05-2012 11:45 PM




All times are GMT -5. The time now is 12:26 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org