|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Replacement for AJP clutch master cylinder DOT4
I am looking for a replacement for a DOT 4 AJP clutch master cylinder. I see several people pointing toward the Magura unit but from what I can see they are all mineral oil based. Are people just using DOT 4 in the Magura or are there easy to find o-rings for the slave cylinder to change over to mineral oil?
I saw one person reference a DOT4 KTM Brembo option but I have not been able to find which bike that came from. I found this one that looks good but I am not sure if it has the same output thread. https://www.amazon.com/KTM-BREMBO-HY...re-bullets-btf Any help would be appreciated |
#2
|
||||
|
||||
While searching for the KTM Brembo I found Magura makes a retrofit for DOT 4.
http://www.ktm-parts.com/0020746.html I am still not sure if this will fit the GG brake line. |
#3
|
||||
|
||||
Braktec bought AJP and now make a new version of this master cylinder.
Or you can try http://www.ajpamerica.com/
__________________
www.endurohp.eng.br Sherco ST300 2015 (Trials) https://www.instagram.com/leocm74/ Brasil! |
#4
|
||||
|
||||
Thank you for the info!
|
#5
|
|||
|
|||
I bought a late model KTM Brembo to fit my 04. I tried unsuccessfully to order a rebuild kit for my AJP, was on back-order for months. The Brembo is great, it moved the engagement point out farther than the AJP, which had to be pulled nearly all the way in to disengage the clutch.
__________________
Sponsors: http://www.evolutionsuspensionproducts.com/ http://www.sportbiketrackgear.com/ Blog: http://www.speedofarrival.com/ |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Clutch Master Cylinder DOT 4 | Zman | "Wanted to Buy" & "Want To Trade" | 0 | 03-11-2017 09:09 PM |
Clutch Master Cylinder | Cory C | Enduro Chassis & Body | 2 | 05-03-2016 03:24 PM |
Issue with Clutch Master Cylinder | 95jersey | Enduro Chassis & Body | 10 | 05-24-2015 12:47 PM |
Is it possible to convert clutch slave cylinder to dot4? | jan_b | Enduro Engine - 2 stroke | 7 | 12-19-2014 12:01 PM |
Looking for a clutch master cylinder assembly... | SpeedyManiac | General Discussions & Announcements | 5 | 05-09-2008 07:06 PM |