Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-17-2014, 08:09 PM
n_green n_green is offline
Senior Member
 
Join Date: Jun 2012
Location: Sydney, Australia
Posts: 675
Default 2014 300 muffler - what to get and where to buy

Managed to throw the '14 down a hill and onto a few rocks the other day which bent the q stealth brackets and stinger pipe section. It was centered over the rear wheel when I picked it up. Managed to bend it back sort of but can't get it good as new and it is constantly rubbing the rear wheel. Also as I bent the stinger pipe section I have to use a fair bit of force to force it up and get it to line up with the subframe holes, which results in the stinger pipe itself resting against the shock reservoir cap.

Ill attempt to straighten it some more but past experience has taught me once they're bent they never line up properly again.

So what options are out there for me, does the '14 use the same muffler as the '12 & '13?

I don't mind the q stealth but it's pretty big and heavy and expensive and sticks out a fair way which is what caused it to be damaged in the first place so a shorter muffler would be ok. I also have NFI where I can buy them. A quick and lazy google doesn't reveal much apart from DEP mufflers on eBay which can be had for A$170.

Suggestions welcome.


__________________
Current:
2014 Gas Gas EC300R
_____________________________________________

Previous:
2011 Gas Gas EC300 ELC
2004 KTM 300 EXC
Reply With Quote


  #2  
Old 08-17-2014, 10:12 PM
n_green n_green is offline
Senior Member
 
Join Date: Jun 2012
Location: Sydney, Australia
Posts: 675
Default

Hmm so looking at the fmf website the '14 muffler has a different part number to the '13. So I guess the '14 has its own special pipe. Of course it does.
__________________
Current:
2014 Gas Gas EC300R
_____________________________________________

Previous:
2011 Gas Gas EC300 ELC
2004 KTM 300 EXC
Reply With Quote
  #3  
Old 08-18-2014, 12:37 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

2013 and 2014 look to be the same chasis and pipes etc.

Check the part numbers in the exploded diagrams from the website. Do some comparisons and see if that answers the question. If not, I'm happy enough to do some measuring on the 2013 for ya!
Reply With Quote
  #4  
Old 08-18-2014, 01:50 AM
n_green n_green is offline
Senior Member
 
Join Date: Jun 2012
Location: Sydney, Australia
Posts: 675
Default

2012/2013 bike - muffler/silencer part# BE85000023012
2014 bike - muffler/silencer part# BE87000GG-CBV-2

Definitely different. Bugger.
__________________
Current:
2014 Gas Gas EC300R
_____________________________________________

Previous:
2011 Gas Gas EC300 ELC
2004 KTM 300 EXC
Reply With Quote
  #5  
Old 08-18-2014, 02:08 AM
swazi_matt swazi_matt is offline
Senior Member
 
Join Date: May 2010
Location: From Swaziland, Now Hamilton New Zealand the “look but don’t touch” enduro heaven
Posts: 2,334
Default

house of horsepower have nice mufflers, i have one on my 2010 and it sounds nice and works well, it is also much smaller than the q-stealth

there was a post here a few days ago about some they have made for the 2014 bikes, also have a messisco look-a-like header
__________________
2003 txt250 Pro
2013 Ossa 280i
Reply With Quote
  #6  
Old 08-18-2014, 02:40 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

What about the frame and subframe part numbers Nath? If they were the same I'd say fair chance the rest will carry over easy enough.
Reply With Quote
  #7  
Old 08-18-2014, 03:17 AM
n_green n_green is offline
Senior Member
 
Join Date: Jun 2012
Location: Sydney, Australia
Posts: 675
Default

Quote:
Originally Posted by Jakobi View Post
What about the frame and subframe part numbers Nath? If they were the same I'd say fair chance the rest will carry over easy enough.
Subframe:
2013 # BE120003013
2014 # BE12000CT-CAB-2

Frame:
2013 # BE10000013013
2014 # BE10000CT-CAB-1

So who knows, the part #'s are similar, but different.
__________________
Current:
2014 Gas Gas EC300R
_____________________________________________

Previous:
2011 Gas Gas EC300 ELC
2004 KTM 300 EXC
Reply With Quote
  #8  
Old 08-18-2014, 04:27 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

I'd say they've changed some naming conventions into 2014. You better load your bike up and head north. We need to get this sorted!
Reply With Quote
  #9  
Old 08-18-2014, 08:42 PM
wa_ndro wa_ndro is offline
Senior Member
 
Join Date: Feb 2013
Posts: 144
Default

email go fasters - they should be able to get you one - a cannon - for $150 landed - or contact the Aussie importer Jeff at the Christini number, last i heard he was bringing in a a batch
Reply With Quote
  #10  
Old 08-18-2014, 08:58 PM
n_green n_green is offline
Senior Member
 
Join Date: Jun 2012
Location: Sydney, Australia
Posts: 675
Default

Quote:
Originally Posted by wa_ndro View Post
email go fasters - they should be able to get you one - a cannon - for $150 landed - or contact the Aussie importer Jeff at the Christini number, last i heard he was bringing in a a batch

Cheers mate I'll give that a shot. You've got a cannon don't you? How do you find it?
__________________
Current:
2014 Gas Gas EC300R
_____________________________________________

Previous:
2011 Gas Gas EC300 ELC
2004 KTM 300 EXC
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Raga muffler? wence Other GasGas Bikes/Quads 0 08-10-2014 12:13 AM
muffler options lonetree General Discussions & Announcements 21 03-22-2014 05:38 PM
07 fsr 450 muffler baffles robbo5 Enduro Engine 4 stroke (including EFI & Exhaust) 5 03-22-2011 07:01 PM
EC200 Muffler iancp5 Enduro Engine - 2 stroke 4 02-08-2009 06:02 PM




All times are GMT -5. The time now is 12:31 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org