|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Kickstart Shaft Seal Replacement EC300
Has anyone had luck replacing the kickstart shaft seal without pulling the sidecover? Have a leaking seal, but feeling lazy and don't really want to pull the cover off to do so.
I made a half-hearted practice attempt on a spare 300 motor I have and was unable to get it to budge using pick/hook tools. Any tips would be greatly appreciated. Thanks.
__________________
Sponsors: http://www.evolutionsuspensionproducts.com/ http://www.sportbiketrackgear.com/ Blog: http://www.speedofarrival.com/ |
#2
|
||||
|
||||
Usually, you can drive a sheet metal screw into the seal then pull on the screw to remove the seal.
|
#3
|
|||
|
|||
Thank you, I was thinking about doing that exactly.
__________________
Sponsors: http://www.evolutionsuspensionproducts.com/ http://www.sportbiketrackgear.com/ Blog: http://www.speedofarrival.com/ |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
output shaft oil seal size | savage sausage | Enduro Engine - 2 stroke | 8 | 08-24-2016 06:12 PM |
Ec250 Output Shaft seal | Scotty97 | Enduro Engine - 2 stroke | 9 | 01-15-2016 07:59 PM |
Inner and outer counter shaft seal | skid jackson | Enduro Engine - 2 stroke | 10 | 11-18-2010 09:59 PM |
Kickstart shaft question | GMP | Enduro Engine - 2 stroke | 6 | 02-22-2009 02:55 PM |
Counter shaft Sprocket Seal | Rick | Enduro Engine - 2 stroke | 4 | 12-03-2007 09:00 AM |