Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > General Discussions & Announcements

General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 06-01-2010, 10:29 PM
HydroDog's Avatar
HydroDog HydroDog is offline
Gold Level Site Supporter
 
Join Date: Sep 2007
Location: Salkum, WA.
Posts: 232
Default Silencer Grommets

Does anybody have a line on where to buy new grommets for FMF silencers?

Mine are about junk and need replacing. I called FMF and they do not sell them seperate, they only come with a new silencer. I was looking at McMaster-Carr and they do not have any that are a close match.

Any ideas?


__________________
07 GG EC 300
05 KTM 250 exc
99 KTM 640 enduro
Reply With Quote


  #2  
Old 06-02-2010, 04:43 AM
eff's Avatar
eff eff is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: RI
Posts: 1,758
Default

Do you mean the tubing where the stinger and pipe meet?
__________________
2004 GasGas DE250
Reply With Quote
  #3  
Old 06-02-2010, 05:29 AM
eff's Avatar
eff eff is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: RI
Posts: 1,758
Default

Or, after I thought about it, the mounting grommits?

BE250026005 - 15-SILENTBLOCK SILENCER

From your dealer.
__________________
2004 GasGas DE250
Reply With Quote
  #4  
Old 06-02-2010, 07:08 AM
Rick's Avatar
Rick Rick is offline
Senior Member
 
Join Date: Aug 2006
Location: Lodi, Ca
Posts: 1,930
Default

I second the OEM stuff, I had to replace my for my TCII, also use OEM.
__________________
Rick
99 EC 200
06 RM 250
AMA D36
375X
OTHG
375S

***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals
Reply With Quote
  #5  
Old 06-02-2010, 08:34 AM
skid jackson skid jackson is offline
Senior Member
 
Join Date: Jul 2006
Location: NH, USA
Posts: 1,057
Default

eff I believe he is talking about the rubber grommets that you put the bolt through to mount the silencer to the subframe

I got a bigger problem ...
my grommets are fine ... but the hole they go into has worn into a bigger size so now the grommets roll around inside the hole and the pipe fits kind of loose, I don't see this getting anything but worse. Only solution is a new silencer or alu welding and machining new holes. which would probably cost the same as a new silencer ...
Reply With Quote
  #6  
Old 06-02-2010, 11:36 AM
flybars flybars is offline
Senior Member
 
Join Date: Aug 2006
Location: Cashmere,Washington
Posts: 643
Default

Could someone take a pic of this? I'm not sure if I understand, but sounds important.
__________________
'14 Beta 300rr
'05 GG DE300
'03 GG EC250
'01 XR440
'09 FZ1
Reply With Quote
  #7  
Old 06-02-2010, 05:50 PM
HydroDog's Avatar
HydroDog HydroDog is offline
Gold Level Site Supporter
 
Join Date: Sep 2007
Location: Salkum, WA.
Posts: 232
Default

Thanks for tip and the part#

I guess I should have made it a little more clear.
I was talking about the mounting grommets. I have the same problem also of the mounting holes being worn out on the silencer but I was going to weld them up and machine them back to size.
__________________
07 GG EC 300
05 KTM 250 exc
99 KTM 640 enduro
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
200 Vs 250 silencer / end can iancp5 Enduro Engine - 2 stroke 1 06-04-2009 02:41 AM
MC Silencer on ab EC 250 '08 GG27 Enduro Engine - 2 stroke 3 03-31-2008 11:16 AM
Side panel mounting screws & grommets: 07 EC 300 Gregarious Enduro Chassis & Body 2 02-19-2008 07:07 PM




All times are GMT -5. The time now is 06:55 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org