|
Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
oil drain plug
Hello people, I changed my oil and filter the other day on my fse400 and the drain plug at the bottom of the crankcase finally rounded the allen key hole. I managed to make it work by banging a torx driver in there but I need a new drain plug. The guy at the local whydontyaownayamahalikeveryonelse shop tells me there are aftermarket plugs listed for ktm's and jap bikes but not gassers. I want a plug with a normal external 6 point hex and magnet but i don't have the thread size and pitch because the old plug had to go back in the bike to get home!
Can someone please tell me where to get a drain plug? |
#2
|
||||
|
||||
I just replaced mine with a stock unit. It took 4 years of frequent oil changes to get buggered. The key is to be careful when tightening it and make sure you do not over tighten.
__________________
2004 GasGas DE250 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PV left drain plug | gasgasquebec | Enduro Engine - 2 stroke | 8 | 03-20-2010 06:09 PM |
2T drain plug | wence | Enduro Engine - 2 stroke | 0 | 10-13-2009 04:28 AM |
Oil Drain Plug size | Motarded1 | Enduro Engine 4 stroke (including EFI & Exhaust) | 1 | 06-22-2008 12:08 PM |
Oil drain plug and radiator cap options | sanderjavant | Enduro Engine 4 stroke (including EFI & Exhaust) | 6 | 10-04-2007 08:18 PM |
Oil Drain Plug | MIKEWA | Enduro Engine - 2 stroke | 4 | 01-27-2007 06:19 AM |