Shift lever

[Trailrider]

Who sells GasGas shift levers these days? I have size 13 feet so the shorter ones won't do. I was hoping to avoid stock as they are $50.Any suggestions?

[Zman]

there are two GG shifters. The short one would have been great for me when I was 9yrs old. The longer one is pretty good. I have size 14 feet and I did not like the Hammer Head +15 shifter because it required a very long throw to change gears and I found I ended up in neutral way too often and at the WORST times. I now use the Emgo shifters. They are a nice length, are durable and cheap $27 if you buy them from the right person on Ebay. This one says Steel but shows the aluminum version. I did not know they made a steel version. You may want to contact the seller to confirm.

https://www.ebay.com/itm/EMGO-STEEL-...fter.TRS0.TSS0

I found that Dennis Kirk has them too.
https://www.denniskirk.com/emgo/alum...prd/577583.sku

[Trailrider]

Thanks Zman, I saw those on Dennis Kirk but said it would not fit. Since you included the part # it does indeed fit (I hope).
Trailrider

[Zman]

Hmmm, the Ebay add says up to 2005. They fit our 2000 to 2004 GG bikes. Can anyone else confirm fitting after 2005?

[SS109]

Originally Posted by Zman

Hmmm, the Ebay add says up to 2005. They fit our 2000 to 2004 GG bikes. Can anyone else confirm fitting after 2005?

Same shifter and this listing says it fits all '98-'17 bikes. https://www.ebay.com/itm/Emgo-Forged...5.c10#viTabs_0 Of course, it lists it as aluminum in the main header but steel under the part description. Hmm...

[Zman]

I would get the aluminum one from DK for 27 bucks.

[Trailrider]

I ordered the aluminum for a spare, I'll let you know about it when it arrives, Tuesday or Wednesday.
Trailrider

[Trailrider]

I received the Emgo shift lever today. It is aluminum, about 5 inches from center of mounting hole to center of tip. I don't have a stock one to compare, it looks similar to the stock one on my old 2001 300. This one does fit my 2010 EC300, it looks pretty good for a spare at least. I ordered from Dennis Kirk part#577583 and 83 88004 It is $23 plus $7 shipping unless you order enough for free shipping. I believe they are also on Ebay.

Trailrider
2010 EC300

[mrfreezer]

RFX and APICO make great shift levers... I have them on all my bikes... unbreakable

[Danj56]

Originally Posted by mrfreezer

RFX and APICO make great shift levers... I have them on all my bikes... unbreakable

Any one sell them here in the US? Need something for my 2011