|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Front Sproket
I have read a lot about rear sprockets, but can't seem to find anything on the front.
What brands do you all use and where do you get them? 99 EC200 is the bike. I have a 12/48 gearing now. Looking to go with a 13 on the front and leave the 48 on rear and go from there. Front is cheaper than rear, so seems like a good start.
__________________
"There is no room in life for Regret, it's a useless feeling that leads to a negative attitude" I would rather call it the "Stupid Tax"! |
#2
|
|||
|
|||
GG only, no interchange. Check ebay or the forum supporters. They're cheap.
Sorry, I thought you meant interchanges. Being steel the fronts last a long time pretty much whatever brand, just my opinion. Pretty sure 13t front was stock. I run 13/50 and my kid runs 12/49 if it matters.
__________________
jeff '00 XC250 (mine) LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion. '04 EC250 (the kids) (he can do his own mods haha!) |
#3
|
||||
|
||||
I bought a Renthal 12 tooth a couple years ago through GoFaster's. My local bike shops' catalogs did not list the application so I'm not sure how easy it is to get on the local level. My factory 13 tooth was made by Talon if I remember correctly.
|
#4
|
|||
|
|||
JT makes steel sprockets for the front.
__________________
Dick Carnes "If ya run, you'll only die tired" 2019 EC 300 2018 GP 300 2013 XC 300 (sold) 2006 DE 300 (buddy has it) |
#5
|
||||
|
||||
Thanks...
I just found a JT 13T on Amazon for $17 that is Prime available! Heck yea! Just ordered it.....
__________________
"There is no room in life for Regret, it's a useless feeling that leads to a negative attitude" I would rather call it the "Stupid Tax"! |
#6
|
|||
|
|||
Yep, that's where i get em. Don't buy the JT chains
__________________
Dick Carnes "If ya run, you'll only die tired" 2019 EC 300 2018 GP 300 2013 XC 300 (sold) 2006 DE 300 (buddy has it) |
#7
|
||||
|
||||
I have Used DID O or X ring chains with good results for many years. The X ring type has somewhat lower rolling friction.
Sent fra min GT-I9295 via Tapatalk
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#8
|
||||
|
||||
Ditto - lasts as long as the highest priced chains but can be purchased much cheaper. I usually get short ones on fleabay and join them together.
|
#9
|
|||
|
|||
Sorry to hijack the thread. Was about to ask this question. Does anyone know if they changed over the years? I find a bunch for 2000-2009, but I have a 2014.
|
#10
|
||||
|
||||
Quote:
Sent fra min GT-I9295 via Tapatalk
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WTB New front rim | john r b | "Wanted to Buy" & "Want To Trade" | 6 | 11-29-2014 08:06 AM |
FOR SALE, 250XC forks, NEW fender, front wheel, front wheel bearings | iamyvr | Parts | 5 | 07-27-2014 08:18 AM |
14 front sproket | gg3 | Enduro Chassis & Body | 13 | 09-26-2010 12:19 AM |
countershart sproket spoogle... | Alex401Smith | Enduro Engine - 2 stroke | 1 | 08-28-2007 08:45 AM |