Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-15-2006, 02:31 AM
Leon_gasgas Leon_gasgas is offline
Senior Member
 
Join Date: Jul 2006
Posts: 175
Default No lights after engine assembling

Hi!

After I fixed the engine and put it on the bike the lights don't work. The bike (EC250 '98) starts first kick always. What could be the cause? I have connected all cables as they were before the stripdown. Can 1 month of no use cause this?

Thank you in advance for any replies!

Leon


Reply With Quote


  #2  
Old 08-15-2006, 02:50 AM
Leon_gasgas Leon_gasgas is offline
Senior Member
 
Join Date: Jul 2006
Posts: 175
Default

Just to add something. Without fidling with the carb the bike cannot idle now. It works fine but cannot idle. I haven't tried to adjust the screw yet. I don't think it relates to the lights but I wanted to add it here.

Thank you,

Leon
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Assembling Odometer Sephiroth Enduro Electrical & Wiring 4 12-06-2009 04:24 PM
lights flickering and going off when revved Elliker Enduro Engine - 2 stroke 9 01-21-2009 05:28 PM
Night Riding Lights Steveo Enduro Electrical & Wiring 12 12-12-2008 07:39 AM
Duel sport lights for MC250 mattmax Enduro Electrical & Wiring 2 11-23-2006 11:24 AM




All times are GMT -5. The time now is 10:27 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org