|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2013 300E (US version) - question on GasGas turn signals, plate light, horn
Hi,
Just picked up a 2013 300E and will setting up to be street legal for traveling between trails. Utah requires horn, turn signals, and plate light. I have purchased a SICASS kit but doesn't look like it is going to match up as well as I had hoped. So the question is has anyone installed original GasGas horn, plate light, and turn signals on this model? Does the stock wiring harness support (I am still taking a part to see what is there) or do I need a euro harness for those connections? Any help appreciated. Best regards, Ned |
#2
|
|||
|
|||
also has anyone been able to get these parts from gofasters I do I need to go through someone like motocrosscenter.com?
Thanx again, Ned |
#3
|
||||
|
||||
You might be able to find someone in Canada willing to part with theirs.
What about the Sicass kit didn't work out for you? It should have been a no-brainer with a bike with a battery already installed.
__________________
Steven Beane #275 PlusOnePerformance - Superior Service the World Over - Dearborn MI AMA District 14 (Michigan) Officer afterhourscycle.com Michigan's Beta and TM Race Headquarters |
#4
|
||||
|
||||
US wiring won't have wires for plate light or turn signals. The Sicass kit may seem intimidating at first but really they are pretty straight forward. I don't think you will have any problems.
__________________
-Mike 2009 Beta Evo 300 4T - 1982 Suzuki PE175 |
#5
|
||||
|
||||
I have the electric start wire harness and it has wiring provisions for all lights. You will need an ac/dc rectifier for the horn and a blinker relay for the signals (I think), but if you have e-start you should have wires front and rear to support the lights.
When you pull the seat, you should have a small bundle for the rear lights, and there are two wires under the fuel tank for the horn. I would assume some of the rat's nest behind the plate will support the front blinkers.
__________________
Phil (New bike pending...) |
#6
|
|||
|
|||
Thanx for the info pscook, coop, and twowheels. It looks like my harness is slightly different that pscook's. The harness does have an additional connector at the taillight that might be for either turn signals or plate light. I suspect plate light. Regarding the SICASS kit I purchased their kit for a gasgas (2010-2012) hoping that it would work for a 2013 E start and be an easy plug an play. They did mention that they had not yet seen a 2013 so there could be differences. So far I have identified differences in the stock light switch connector as well as the rear fender extension for taillight and plate. Mounting option for the front turn signals is also different as the 2013 headlight plastics do not have enough plastic for mounting. I will likely have to work out the differences with them and I am happy to help get a kit sorted out for a 2013 E start. It is a really nice kit otherwise. I was just seeing if anyone on the forum had experience with any other options (like the non-US spec harness and signals, etc.).
|
#7
|
|||
|
|||
I bought the OEM turn signals from Go Fasters for my 2007. Fitted up perfectly to the headlight an taillight. I had to build my own wiring harness.
__________________
06 Kawasaki KLR 650, 21 Beta 300 RR |
#8
|
|||
|
|||
thanx super_rat for the useful info! I have shipped my harness back to SICASS Racing and hope to get the mods done. I will check out gofasters.
|
#9
|
|||
|
|||
Quote:
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
#10
|
|||
|
|||
This is a shot of the rear fender extension with the integrated turn signals, brake light and tag light. It was only like 45 dollars from motocross center and it was straight plug and play.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Turn Signals | Wicitup | General Discussions & Announcements | 15 | 10-28-2014 04:12 PM |
1 2012 300E & 1 2013 300E brand new | Mo.man | New Bikes | 0 | 05-22-2013 10:28 PM |
Turn signals | Wicitup | Enduro Electrical & Wiring | 1 | 03-06-2012 09:22 AM |