Part-Out 2010 300 and 2009 200

[husley]

UPDATED 9 18 16

All prices do not include shipping. I think (and hope) that my prices are reasonable. I don't want to make a fortune off this stuff, just a fair deal for both parties......and I want it out of my garage


2009 200 50hrs on the bike. Parting-it-out due to the motor attempting to commit suicide.

Send me a PM or Email (preferably with the part you are interested in and your phone # ) and I'll gladly text pics. Texting is simplest for me.

Engine minus Stator (top end, bottom end, reeds) AS IS Piston and Cylinder damage-not sure what happened. Besides a lack of low-end the bike ran fine, I happened to find the cracked piston when I decided to measure/adjust squish. Engine was actually running fine, have GoPro video of the last ride.. (09' 200)
$400

Pipe OEM. One small dent (09' 200)
$100

P3 Pipe Guard 200/250/300
$75


Oversized PV Cover- this is the one machined by the guy on this forum. It is two separate spacers, uses OEM Cap.
$40



Sachs Shock. (09' 200) Sprung for 200lb rider weight. Valved for rocks/very soft. 09' 200
$150

Triple Clamps. Top Clamp is the GPR Stabilizer Mount Clamp Includes Collar/Pin $150. (09'200)

Triple Clamps OEM (10' 300)
$70



Wheels (front and rear) 09 200. $300. One small dent to rear rim.
Wheels (front and rear) 10' 300 $300


10' Plastics (not including actual/glass headlight). White. Custom Graphics
$50
09' Plastics OEM.
$50

Scorpion Rad Guards (09' 200) $75

OEM Radiators. (09 200')
$150

Plastic Frame Guards (just above pegs) 10' 300 + 09' 200
$5 each

Front Brake complete with lever (09' 200) $150

Aluminum Skid Plate $40 (09' 200)

Rear Brake complete with lever (09' 200) $150

Clutch complete, MC, Slave, Lever and Line
$100 (10'300)

Clutch complete, MC, Slave, Lever and Line
$100 (09' 200)

OEM Tank with Cap and Petcock. (09' 200)
$50

Carb OEM. Jets, Needle, Motion Pro +3" and Throttle included $150 (10' 300)

Carb OEM. Jets, Needle, Cable and Throttle included $140 (09' 200)



Subframe (metal portion only, no plastic/airbox etc) 10 300 $150

Frame with Title $200 (09' 200)

Swingarm- has defect where a bolt that was too long (installed by yours truly) wore into the material. Bearings and Seals are new $50 (10' 300)





Airbox $ 20 (10'300)


Full Linkage $100 (09' 200)

GPR Sub-Mount kit (including collar and post). Stabilizer not included. (10' 300). Also have smaller I.D. Collar. Fits many years
$50

TwinAir Air Filters (2) -used but life left in them $5 each



OEM Chain Guide $5 (09 200')


OEM Bar Mounts $10


Rad/Engine hoses $5

Bucket of Bolts. 75% of the bolts, nuts, fasteners, etc. Basically all the bits left-over after the part-out
$40

Rear Brake Lever (09' 200)
$40

Kickstand
$50

OEM Handguards/Plastic Deflectors (removed at 5hrs) $5 (black, 10' 300)

Wiring Harness with Stator $250 (09' 200)

Sicass Dual-Sport Lighting Kit. Headlight (bulb) included. LED rear turn signals, LED front hand guard turn signals.
$200

New Rear Pads EBC $ 10 ?

Front Brake and Clutch Levers (worked on my 09 and 10)
$15