|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2004 G/G 250 Motor into G/G 200???
Anyone out there ever try to put a 250 motor into a 200 chaisis? Have chance to buy 250 motor and wonder if it would fit into my current G/G. Just want a little more power and it would be any easy way of doing it if it fits - Motor Mtgs, Pipe, Swing Arm, Carb, etc. Please let me know. THANKS
Bob (C) 603-289-9585 or e-mail bobcre150@comcast.net |
#2
|
||||
|
||||
What year 200 frame? In '03 the swingarm pivot dia changed, and in '05 the cases and motor mount position changed slightly. So, for an '04 motor, an '03/'04 frame should be no problem.
|
#3
|
||||
|
||||
i just put a 02-ish 300 motor in a 00 200 frame. fit like it was meant to be there.
__________________
07 ec300 was 00 xc200 now a 00 xc300. now parting out. 99 ec300 (now a pile of parts which are for sale) Stainless Cycle - Motorcycle Bolt Kits www.stainlesscycle.com |
#4
|
|||
|
|||
2004 GasGas 200 fitted with 2006/2007 250cc Motor
Thanks guys for the response. My G/G is a 2004 200 and I am trying to put either a 2006 or 2007 250cc Motor into my 200 frame. A good friend of mine is selling a couple of motors and I'll get one of the Motors and check the dims to see if it'll fit. He also has a 250 pipe so I'll see how that fits a well.
Thanks, Bob |
#5
|
|||
|
|||
You will only need a small spacer for the motor mount down by the shifter then. Although it wouldn't be necessary because the rest of the mounts will be tight so the motor won't move.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
I think I need a motor pulldown??? | wence | Enduro Engine - 2 stroke | 21 | 03-16-2011 02:03 AM |
Rebuild 200 Motor | ramcclure200 | Enduro Engine - 2 stroke | 0 | 05-04-2007 07:10 AM |