GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


Reply
 
Thread Tools Display Modes
  #1  
Old 11-01-2009, 03:14 AM
Paul Somerville Paul Somerville is offline
Member
 
Join Date: Aug 2009
Posts: 5
Default help and advice please 400 output shaft

well since my last post i have now rebuilt the gearbox that gecided to friction weld 1st gear to the main shaft.

question is now how much end float should the output shaft have so if you have a 400 please could you help me by measureing the amount of float if you push and pull the engine sprocket how much does the shaft move in and out please

another question is do all 400's smoke on start up from cold, mine is fine after about 1 min warm up has new rings valve stem seals and good compression

can anyone tell me the function of the ball bearing and the spring that fits in an adjacent hole to the oil intake line is this some type of pressure release valve my spring looks like someone has stretched it i dont realy undersand what this ball does i have good oil cirulation (now) and am useing Rock oil TRM which is brilliant and has quietened the engine

haveing just read another thread can anyone please confirm how much engine oil should i be putting in my bike the manual i have says 1.8 lts i wonder if i am putting in too much oil?

all help will be appreciated as i am fast loosing the will to live with this bike (until i ride it next)


Reply With Quote


Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Waterpump shaft end play SpeedyManiac Enduro Engine - 2 stroke 1 04-08-2009 09:05 AM
swing arm shaft stuck whodat Enduro Chassis & Body 17 03-22-2009 07:53 AM
Kickstart shaft question GMP Enduro Engine - 2 stroke 6 02-22-2009 02:55 PM
300 De Stator Output? Boomhauer Enduro Electrical & Wiring 11 10-23-2007 09:07 AM
EC300 Stator Output Magellan Enduro Electrical & Wiring 10 07-21-2006 12:12 PM




All times are GMT -5. The time now is 09:12 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org