Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Other Bikes... > All Other Bikes...

All Other Bikes... KTM, Husky, VOR, Husaberg & Hondayamazuki...


Reply
 
Thread Tools Display Modes
  #1  
Old 04-29-2017, 08:26 AM
adriano.ro adriano.ro is offline
Senior Member
 
Join Date: Feb 2015
Location: Romania
Posts: 208
Default Husaberg te 300 2012 jetting

I'm new owner of Husa and I'm playing with jetting now.
Now I have 38p, N2ZJ@3 168 pilot as 1.5, temp 10C-25C, alt 800m.
I like how bike run but I have some needles and I want to know witch one of those give best torque for my bike,and the needle ar: N8RW,N8RK,N2ZL,N2ZK,N3CW. How will run n3xx vs n8xx?

If someone have other needle with good results, can post here.


Reply With Quote


  #2  
Old 04-29-2017, 05:46 PM
ScottyR ScottyR is offline
Junior Member
 
Join Date: Jul 2006
Location: Stratford, Ontario
Posts: 605
Default

#3- NECJ, 40 pilot, 165 main gets you really close.
Reply With Quote
  #3  
Old 04-29-2017, 09:15 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

All the needles you listed are the same taper profile

In 1/2 clip variations from leanest to richest they are...
N89x=leanest
N3Cx
N3Ex
N8Rx
N2Zx
N4Dx
N3Vx
N4Ax
N6Mx=richest

I agree with ScottyR. Suzi needle will get you close fast!
Reply With Quote
  #4  
Old 04-30-2017, 12:50 AM
adriano.ro adriano.ro is offline
Senior Member
 
Join Date: Feb 2015
Location: Romania
Posts: 208
Default

NECJ is the most used needle on ktm,very good report,I just ordered one from motocrosscenter.com. , but wath I found also is N3CH with good results.
Reply With Quote
  #5  
Old 04-30-2017, 02:36 AM
swazi_matt swazi_matt is offline
Senior Member
 
Join Date: May 2010
Location: From Swaziland, Now Hamilton New Zealand the “look but don’t touch” enduro heaven
Posts: 2,334
Default

My experience of the n3 vs ne needles the ne is more linear power the n3 is similar on the bottom with a harder (more fun!) hit when you are on the pipe
__________________
2003 txt250 Pro
2013 Ossa 280i
Reply With Quote
  #6  
Old 04-30-2017, 01:57 PM
Tech51 Tech51 is offline
Member
 
Join Date: Mar 2017
Posts: 28
Default

On my KTM's with out my SC or Lectron on them I like the N3CH 3rd 38 165 1.5 out
Reply With Quote
  #7  
Old 05-14-2017, 02:51 PM
adriano.ro adriano.ro is offline
Senior Member
 
Join Date: Feb 2015
Location: Romania
Posts: 208
Default

Update: p40 necj.3 main 165. Very smooth power delivery. But I have some hesitation on wide open throttle,sounds clean but has about 1-2 sec of that pause. No sign of topical lean sound booooaaa. When I have tested the needle was a bit cold,under 10C ,and air screw was only 0.5 tourn out.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2012 EC 200R Jetting Help ben Enduro Intake/Carburetion - 2 stroke 4 02-21-2017 06:50 PM
My jetting setup (2012 300) GlennRMK Enduro Intake/Carburetion - 2 stroke 4 06-13-2013 10:09 PM
2012 300 jetting bones150 Enduro Intake/Carburetion - 2 stroke 3 05-10-2012 05:56 AM
2012 300 JD jetting kit mblazer11 Enduro Intake/Carburetion - 2 stroke 11 04-17-2012 10:12 PM




All times are GMT -5. The time now is 06:13 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org