|
Parts New/Used Components and All Bike Part Outs |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2013 250 top end - about 4 hours total
I have a complete 2013 top end(cylinder, piston kit, head) with about 4 hours since new - going to a complete 300 top end. Will need a gasket set and you are good to go!
$400 + postage PS>> My 300 top end should be here around the 20th and will be shipped then via UPS SOLD!! Last edited by EnduroNut; 05-08-2018 at 09:41 PM. Reason: PRICE DROP! |
#2
|
|||
|
|||
Lower Price
$400 for a complete top end minus gaskets!
Last edited by EnduroNut; 03-22-2018 at 09:21 PM. Reason: PRICE DROP! |
#3
|
|||
|
|||
interested on the 300 where about are you ??
|
#4
|
||||
|
||||
I think he is converting from a 250 to a 300 so he is selling the 250 top end.
|
#5
|
|||
|
|||
Sorry for the misunderstanding... The top end is a 250 that I am selling. Changing to a PS3 300 top end.
|
#6
|
||||
|
||||
Too bad it won't fit a 200 crank
|
#7
|
||||
|
||||
Actually the 250 and 300 cylinders will bolt on but the cylinder is about 0.2" taller and the piston sits too far down. You can do a big bore kit on the 200 to make them a 237cc.
|
#8
|
|||
|
|||
buy a 250 bottom end and you are good!
|
#9
|
|||
|
|||
Offers...?
Any offers? Keep in mind the complete top end is almost new - the entire bike only has lees than a tank of gas through it!
|
#10
|
||||
|
||||
Top end
How about 300.00 plus shipping to 80602
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2013 xc300 race Less than 15 hours!!! $4800OBO | rzide | Used Bikes | 10 | 09-06-2015 08:37 PM |
Fully Loaded 2013 XC300 - 30 hours | twowheels | Used Bikes | 2 | 04-17-2015 08:44 PM |
2013 XC 200 GasGas less than 10 Hours | djroggen | Used Bikes | 8 | 04-14-2015 09:12 PM |
04 TXT Pro 200 12 hrs total time | husley | Used Bikes | 2 | 04-12-2014 12:35 PM |
EC300 2008 total hours on TT speedo? | stevethebrit | Enduro Electrical & Wiring | 2 | 06-16-2009 04:41 PM |