GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Product Reviews

Enduro Product Reviews Feedback & Comments on Products Tested


Reply
 
Thread Tools Display Modes
  #1  
Old 05-07-2017, 03:00 PM
Halcon Halcon is offline
Member
 
Join Date: Mar 2017
Location: Calgary
Posts: 15
Thumbs up Fastway Evo 3 footpegs

Hi All, thought I would make a quick post about my new Fastway Evo 3 footpegs. I was a bit nervous about fit as Fastway only lists fitment to 2012 for Gas Gas and I have a 13, but they went on no problem. They are supplied with a bushing that allows them to be installed in the stock location or down and back by around 14mm, I chose down and back. They also come with some shims that you place under the head of a bolt, you use the shims and bolt to adjust the angle of the pegs, a nice feature that I didn't know about when I bought them. They also come with two different length screw in studs, these provide the grip for your boots on the pegs, you can use combinations of the different lengths to contour them to your preference. I went with all short and am very happy with the grip. During my ride yesterday my pegs provided great grip and didn't pack with mud like one of the other guys stock pegs did. Overall I am very happy with the product and as I have big feet much prefer the down and back position. For the weight obsessed I did weight them and they are I think, around 50 or 60 grams heavier than the stock pegs, but well worth it.


Reply With Quote


  #2  
Old 05-08-2017, 02:27 AM
swazi_matt swazi_matt is offline
Senior Member
 
Join Date: May 2010
Location: From Swaziland, Now Hamilton New Zealand the “look but don’t touch” enduro heaven
Posts: 1,989
Default

do the gg branded evo3 allow for them to fold up fully on the brake side?

I fitted the yz ones and had to grind a lot off the corner to get them to fold up, but really noticed the benefits of grip on the first ride
__________________
2010 ec 300
Reply With Quote
  #3  
Old 02-03-2019, 12:42 PM
exman exman is offline
Member
 
Join Date: Nov 2018
Posts: 12
Default Fastway Evo 3 footpegs

After I saw review on ENDURO CROSS TRAINING, I've decided to adapt the OEM pegs to move them down and to the rear. Just cut off pipelike extension on peg and have it TIG welded on the other side. Switched the springs position (left goes on RS and right goes on LS) and did some grinding of corners to allow full pivot of the pegs. For those who like it fast and cheap.

IMG_20190202_103355 (1).jpg

IMG_20190202_102536 (1).jpg

IMG_20190202_103450.jpg

IMG_20190202_121034 (1).jpg
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fastway Footpegs StuJohnson Parts 5 12-21-2013 04:12 PM
Used Fastway footpegs andykr87 Parts 2 10-14-2013 09:33 PM
anybody use a fastway damper?? Cruiser General Discussions & Announcements 8 01-08-2012 09:32 PM
Footpegs: Fastway or Pivot Pegs? SpeedyManiac Enduro Product Reviews 19 12-13-2009 06:15 PM




All times are GMT -5. The time now is 05:42 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org