GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-08-2019, 06:05 PM
sammittrue sammittrue is offline
Member
 
Join Date: Feb 2019
Posts: 3
Default 05 300 EC stator compatibility?s

Hi my sons 05 300 EC started developing stater issues, gas gas was asking $340 for a brand new unit. Ricky stater offered $250 for rewind. my question is they look very similar to 00-07 ktm 300 stators. Are they compatible? I believe it?s a 2k2 stator. Any and all input appreciated. Thanks
Attached Images
File Type: jpg 2EE2D91A-418D-4121-83F0-193C8DAD4B0F.jpg (118.2 KB, 14 views)


Reply With Quote


  #2  
Old 02-09-2019, 08:30 AM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,417
Default

I believe you will need to mount the stator on the GG backing plate to get the orientation/timing correct. Do the two stators look the same (coil orientation relative to the mounting holes) and do they have the same wiring? If they look very similar try it and see. If they are not very similar in orientation / clocking with same wiring you will have more work to do.
Reply With Quote
  #3  
Old 02-09-2019, 09:45 AM
sammittrue sammittrue is offline
Member
 
Join Date: Feb 2019
Posts: 3
Default

To be honest I?m not sure if what I took off the bike is the OEM stator. It?s completely different from picture in the manual. As far as comparing my stator to the ktm (witch I think is what this is) the pick up is slightly clocked different between the two. What a mess. Heres a photo of mine vs what I?m hoping will work after changing the wire connectors. What do you think?
Attached Images
File Type: jpg E57DA272-FCD9-4BDD-8106-FF41441C7671.jpg (118.2 KB, 12 views)
Reply With Quote
  #4  
Old 02-09-2019, 09:47 AM
sammittrue sammittrue is offline
Member
 
Join Date: Feb 2019
Posts: 3
Default

Not sure why it didn?t upload but hers the new unit
Attached Images
File Type: jpg F73CDD43-D9B4-40C3-9DF5-19AC68CD0258.jpg (7.1 KB, 12 views)
Reply With Quote
  #5  
Old 02-09-2019, 11:29 AM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,417
Default

That photo is really small. Can you post it larger? Can you also post the ktm and GG stator plates side by side?
Reply With Quote
  #6  
Old 02-09-2019, 11:33 AM
Neil E. Neil E. is offline
Senior Member
 
Join Date: Mar 2007
Location: Gormley, Ontario, Canada
Posts: 1,265
Default

Look at this topic:
http://www.gasgasrider.org/forum/showthread.php?t=23712

It shows the GG/KTM comparison for the larger 2K3.
You should be able to do the same thing with the 2K2.
__________________
2011 XC250E
Reply With Quote
  #7  
Old 02-09-2019, 11:54 AM
(F5)'s Avatar
(F5) (F5) is online now
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 1,252
Default

I got my ktm stator from Electrix for my ec300 07.
__________________
'07 EC300
496 CPI Cheetah RZ/RGV hybrid
675 Street Triple R
RS125 framed MB100 racer
Stinger T125 Suzuki
Reply With Quote
  #8  
Old 02-10-2019, 08:07 PM
SS109's Avatar
SS109 SS109 is online now
Senior Member
 
Join Date: Jan 2011
Location: Tucson, AZ
Posts: 342
Default

Learn to roll your own. I've rewound stators myself with good results. It just takes patience.
__________________
Tucson Dirt Bike Trail Riders Meetup Group
AZ State Parks OHV Ambassador
'11 EC250
'05 EC250 (stolen )
'98 KDX220
Reply With Quote
  #9  
Old 02-11-2019, 01:45 AM
(F5)'s Avatar
(F5) (F5) is online now
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 1,252
Default

Hi voltage coils encased in resin on plastic forma. Swine to separate one from the other. Can't burn it off without destroying it.
__________________
'07 EC300
496 CPI Cheetah RZ/RGV hybrid
675 Street Triple R
RS125 framed MB100 racer
Stinger T125 Suzuki
Reply With Quote
  #10  
Old 02-11-2019, 03:07 PM
SS109's Avatar
SS109 SS109 is online now
Senior Member
 
Join Date: Jan 2011
Location: Tucson, AZ
Posts: 342
Default

Quote:
Originally Posted by (F5) View Post
Hi voltage coils encased in resin on plastic forma. Swine to separate one from the other. Can't burn it off without destroying it.
Correct. It can be somewhat frustrating but worth it IMO. You gotta do either the source coil, which is only one pole, or the lighting coil, which is the rest of the poles, or do both circuits completely. It isn't that hard to do. It just takes patience and a steady hand. Like I said, I've done it and I'm just an average guy with no special tools or training.
__________________
Tucson Dirt Bike Trail Riders Meetup Group
AZ State Parks OHV Ambassador
'11 EC250
'05 EC250 (stolen )
'98 KDX220
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rear sprocket compatibility Bentiggerwyles Enduro Chassis & Body 3 08-10-2017 05:48 PM
Clarke Tank Compatibility 2010 to 2011 gasgasfk General Discussions & Announcements 5 08-25-2012 08:34 AM
2011 Clark Tank compatibility gasgasfk Enduro Chassis & Body 1 08-23-2012 05:47 PM
frame compatibility? dirtrider0129 Enduro Chassis & Body 1 02-06-2011 07:14 AM
2010 EC250 4T Aftermarket Exhaust Compatibility Jeffro General Discussions & Announcements 3 10-27-2009 04:45 AM




All times are GMT -5. The time now is 01:33 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org