|
"Wanted to Buy" & "Want To Trade" Bikes or Parts |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
WTB Stock fork and shock springs for 2007 EC300 (Australia)
Hi guys,
Chasing fork springs and a shock spring suitable for someone 75kg (me). I believe that the stock springs would be suitable? Currently have stiffer springs from previous owner fitted, would be more than happy to trade if that suited? Apparently current springs are rated for a 95kg specimen. Thanks, Brody |
#2
|
||||
|
||||
What suspension is it running? 45mm Zokes and Sachs shock? I have several sets of springs floating around, but you'd need to confirm the length/ID/OD that you require.
|
#3
|
||||
|
||||
G'day mate. Thanks for the reply. The forks are marzocchi shivers, 50mm I believe (need to confirm). This is a total amature question but the fork diameter is measured at the top triple clamp right? And it's an ohlins shock.
|
#4
|
||||
|
||||
I have a set of standard springs,45zooks888oh you can have for postage only from NZ.
pm if you want them. |
#5
|
||||
|
||||
Good deal Monkey!! ..and they will be the right ones!
The forks are measured OD of the lower leg. They'll likely be 45mm Marzocchi OCs. Your shock will be the Ohlins 888. |
#6
|
||||
|
||||
Yet to meet a kiwi that wasn't a nice guy! thanks for your help guys, gasmonkey will pm you now.
thanks, brody |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WTB shock/fork springs | farmerj | "Wanted to Buy" & "Want To Trade" | 5 | 08-27-2015 09:00 PM |
Fork model and stock springs 2007 EC300 | Paynebrody | Enduro Suspension | 0 | 07-20-2015 04:14 AM |