Kill Switch

Dingo · #1 12-05-2008, 01:05 AM

Hey Hey

I have an 07 EC300. Ive taken off the light and the speedo. I would like to remove the switch gear for the horn, indicators, lights etc, and just have an aftermarket kill switch.

Can anyone tell me what to connect to what?

Dingo · #2 12-05-2008, 10:16 AM

Anyone?

gasgasman · #3 12-10-2008, 07:53 AM

Take your switch bezel apart and trace the wires to the kill button.
Cut those wires and splice in your new kill switch. Any Jap bike kill switch will work.

2 strokes 4 life · #4 12-10-2008, 09:34 AM

I used a YZ250 kill switch without any problems. I just connected the wires to the black and yellow coming from CDI and the soild black coming from the CDI and I was all good.

Dingo · #5 12-10-2008, 04:23 PM

Thanks guys.

Traced them, and sorted with a YZ Kill switch.

Alls good

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
'05fse450 has no kill switch	flybars	Enduro Electrical & Wiring	10	07-17-2018 08:49 AM
kill switch extending?	lordfeyr	Enduro Electrical & Wiring	3	01-14-2010 06:50 PM
1999 TXT270 kill switch	SpeedyManiac	Enduro Electrical & Wiring	4	06-25-2009 07:33 PM
Billet kill switch	gasgasman	Enduro Product Reviews	1	03-29-2009 12:01 AM
06 Txt250pro - Kill Switch?	monkey8414	Enduro Electrical & Wiring	0	01-15-2007 04:16 PM