Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 03-09-2020, 04:16 PM
Mikesbaron Mikesbaron is offline
Member
 
Join Date: Feb 2019
Posts: 31
Default How do I remove stator cover? (4-stroke)

2007 FSR450

I need to replaced pulsar sensor coil, which I already have in possession. How do I get the damn stator cover (left) off? I removed starter, removed small cover bolts and then removed the big nut holding it on.

Do I need a flywheel puller? Because I also tried ordering a 27 and a 28 mm external thread flywheel puller and no dice, neither of them fit. The 27 mm was too small and the 28 mm was the internal threaded one. I can't find a 29 mm external thread. Some guidance is much appreciated.
Attached Images
File Type: jpg photo_2020-02-19_07-41-25.jpg (125.5 KB, 9 views)


Reply With Quote


  #2  
Old 03-10-2020, 03:15 PM
swazi_matt swazi_matt is offline
Senior Member
 
Join Date: May 2010
Location: From Swaziland, Now Hamilton New Zealand the “look but don’t touch” enduro heaven
Posts: 2,334
Default

does the exploded view help?
https://gasgas.com/en/manuals?c=enduro&y=2007
__________________
2003 txt250 Pro
2013 Ossa 280i
Reply With Quote
  #3  
Old 03-10-2020, 03:51 PM
Mikesbaron Mikesbaron is offline
Member
 
Join Date: Feb 2019
Posts: 31
Default

No that diagram is not the same as mine. My left side cover has a threaded innner area. I'll try to take a pic tonight.
Reply With Quote
  #4  
Old 03-10-2020, 05:23 PM
TGM_OFFROAD TGM_OFFROAD is offline
Senior Member
 
Join Date: Aug 2019
Posts: 117
Default

by stator cover do you mean the flywheel? yes you will need a flywheel puller for that, I believe that motor started life as a Suzuki DR-z so take a look for the specs of the DRZ flywheel puller.
Reply With Quote
  #5  
Old 03-10-2020, 07:42 PM
Mikesbaron Mikesbaron is offline
Member
 
Join Date: Feb 2019
Posts: 31
Default

I measured and it appears to be 29 mm with a 1.5 mm pitch. I cannot seem to find anything doing multiple keyword searches on Amazon and fleabay.

See pics attached.
Attached Images
File Type: jpg 20200310_172507.jpg (124.4 KB, 10 views)
Reply With Quote
  #6  
Old 03-11-2020, 03:43 PM
swazi_matt swazi_matt is offline
Senior Member
 
Join Date: May 2010
Location: From Swaziland, Now Hamilton New Zealand the “look but don’t touch” enduro heaven
Posts: 2,334
Default

looking at the exploded view (pg72) it looks like a big cover, so you may not have all the bolt off, i also see some dowels, I have had problems with those previously where they corrode and seize
__________________
2003 txt250 Pro
2013 Ossa 280i
Reply With Quote
  #7  
Old 03-11-2020, 04:27 PM
Mikesbaron Mikesbaron is offline
Member
 
Join Date: Feb 2019
Posts: 31
Default

I'm 99% sure I have everything unbolted. I've tapped on it with a mallet for a while and no movement. I just ordered an external thread flywheel remover kit and it looks like it might have the one I need to push it off.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stator cover adv rider Enduro Engine - 2 stroke 1 04-30-2014 10:19 AM
Remove valve cover - Impossible [450 SFE -05] luzt Enduro Engine 4 stroke (including EFI & Exhaust) 2 02-18-2013 06:52 AM
Gear lever - cant change up, rubbing on stator coil cover KTMAndy Enduro Chassis & Body 7 04-05-2012 09:38 AM
how do you remove the kickstart noobi Enduro Chassis & Body 13 09-22-2011 03:31 PM




All times are GMT -5. The time now is 08:53 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org