|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Foot pegs
I have a 2005 ec 300 that needs new pegs.
Are they a gasgas specific item or are they the same as other brands ? |
#2
|
|||
|
|||
I run Pivot Pegz on my 2010 model but they were on my 2005 model before I sold it. The Pivot Pegz site shows that the same pegs fit on:
Gas Gas 1999-2014 EC, XC, MX, EC FSE All Capacities Kawasaki 1997-2004 KX 125-250 Kawasaki 2005-2008 KX 125 Kawasaki 2004 KXF 250 Suzuki 2003-2008 RM 125-250 Suzuki 2004 RMZ 250 Hope this helps a bit. |
#3
|
||||
|
||||
Yamaha pegs will fit the Gasgas
Sent fra min E5603 via Tapatalk
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#4
|
||||
|
||||
IMS Yamaha pegs fit
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#5
|
||||
|
||||
2010 and later YZ 5XC pegs are wider and made from Titanium so you can save a little weight.
5XE pegs are similar to stock GG pegs but made from Titanium. http://www.thumpertalk.com/topic/790...footpegs-pegs/ |
#6
|
||||
|
||||
I have YZ/YZF Pivot pegs fitted to my 02EC300.
|
#7
|
|||
|
|||
Note that you will need to mod the RHS peg (if you go with other brands) to alow space for the brake pedal when the pegs fold up.
It involves a fair amount of grind and can get costly if not done properly, I initially didn't grind off enough of the Fastway pegs and the pegs hit a rock fairly hard forced the brake internals out of the brake mc I eventually had to get a new mc as the circlip groove rounded and the internals kept falling out every time there was any sort of upward contact to the lever
__________________
2003 txt250 Pro 2013 Ossa 280i |
#8
|
|||
|
|||
Also pegs from
1999-2016 YZ 250 will fit. |
#9
|
||||
|
||||
I recently replaced the foot pegs on my 2004 EC300, I was surprised how expensive they were...then I saw this Stainless Steel set on eBay, from China for only 15 euros including postage!!
I thought I'd give them a go, I had to wait 2 weeks for delivery, but when they arrived I was pleased with the quality. I've been using them for a few months now and I'm very happy with them, no complaints, especially for the price! PegsSS (1) (Medium).jpg PegsSS (3) (Medium).jpg PegsSS (2) (Medium).jpg If anyone decides to buy similar, be careful to check the diameter/length of the mounting hole and pin...I didn't and I had to drill/enlarge the mounting hole in the pegs, other than that they were a perfect fit! Last edited by Davehuge; 09-14-2018 at 04:10 AM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Foot pegs. | Ud_luz | Enduro Chassis & Body | 10 | 06-10-2014 10:30 AM |
08 250 DE with KLX110/CRF50 foot pegs | five21racing | Enduro Other... | 4 | 01-28-2009 08:58 PM |