|
|
|||||||
| Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
|
Thread Tools | Display Modes |
|
#1
09-02-2021, 12:08 AM
|
|||
|
|||
Rich-Lean fueling EC300 '08?
I've had lots of great help with jetting for this bike I bought recently - was fouling plugs and obviously rich. I got an NECW needle installed - it's now running strong down low but still a bit rich - air screws 2.5 turns out to idle. Starts easily. I also found the PJ was blocked. I'm going to try a 40 PJ - currently 42. When it gets to 1/3 - 1/2 throttle it's now starting to get a ticking noise - I'm thinking it's lean in the middle and pinging? Should I raise the needle and see if it goes away? Currently on Middle pos.
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Running rich EC300 | swegass | Enduro Engine - 2 stroke | 15 | 08-19-2017 08:00 PM |
| Lean response but I'm rich. | adriano.ro | Enduro Intake/Carburetion - 2 stroke | 7 | 01-30-2017 10:09 AM |
| How effects rich/lean mixture to engine life? | blamir | Enduro Intake/Carburetion - 2 stroke | 4 | 08-28-2014 04:34 PM |
| Am I rich or lean? | pscook | Enduro Intake/Carburetion - 2 stroke | 6 | 08-01-2012 10:17 PM |
| Rich or Lean | dickieshep | Enduro Intake/Carburetion - 2 stroke | 10 | 07-21-2011 01:33 AM |
Threaded Mode