|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Quote:
|
#12
|
|||
|
|||
Quote:
This one? https://www.as3performance.co.uk/gas...r-motor-cover/ I will wait for the original cover to see if it solve the problem. |
#13
|
|||
|
|||
Quote:
|
#14
|
|||
|
|||
Hi eralha, Yeah, I'll inspect everything while I've got it apart, and use the dremel where I need to. I pulled the circlip out, and had a quick attempt at getting one of the bearings out, but it's in there pretty tight; I might have another go on the weekend.
Does that shaft(part 16) just pull out, or do I need to get the bearing(part 21) out first? (I'm worried about breaking something if I apply too much force when I'm not s'posed to be, and would rather not have to order new parts!) Last edited by BenS; 10-16-2019 at 05:08 AM. |
#15
|
|||
|
|||
Quote:
Inspect the cover(13) the hole where shaft(16) enter to see if there is any wear. |
#16
|
||||
|
||||
Heat is your friend. Hot air gun even a hair dryer will make the cover expand quicker than the bearing.
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
#17
|
|||
|
|||
Ok, thanks elraha and GasserNate.
|
#18
|
|||
|
|||
Just got this bike and I'm in exactly the same situation.
Any tips for removing bearing (21)? Did you use pullers with the gear still inside? Thanks |
#19
|
|||
|
|||
Quote:
Took out the starter and removed the lock nut on the bearing. Put the starter back again and hit the starter button just half a second, the force the starter does is enough to make it come loose. I know this isn't the best way but it worked for me. Thanks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2019 ec300 fuel | mrquick | Enduro Engine - 2 stroke | 76 | 09-29-2021 01:58 AM |
AS3 bendix cover 2018 | GG221 | Enduro Engine - 2 stroke | 17 | 03-24-2020 06:46 AM |
2019 EC300 mods | Nightwind15 | General Discussions & Announcements | 9 | 06-27-2019 09:14 PM |
2019 ec300 | Saddleback51 | Enduro Intake/Carburetion - 2 stroke | 0 | 11-08-2018 12:26 PM |
need:Starter Clutch Bendix 2013 EC300 | 64Opaka | Parts | 5 | 06-27-2016 01:19 PM |