|
"Wanted to Buy" & "Want To Trade" Bikes or Parts |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
WTB: ECU/CDI for FSR/FSE
Utah here.
Need a new CDI/ECU for a 2007-2008 FSR or FSE 450. |
#2
|
||||
|
||||
Why do you think you need one? There was not one that I sold to around ten different people that was the actual problem when I was a dealer. It was more often than not a wiring issue at the ecu plug.
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
#3
|
|||
|
|||
Ok thanks for the insight. The clip that holds the ECU to the wiring harness is broke so i zip-tied it together. I'm not sure how to tell if there is a bad connection there still.
|
#4
|
||||
|
||||
You can buy the socket separately. It is the same as some Ducatis. The wiring usually breaks just after the plug. It is very hard to find though.
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
#5
|
|||
|
|||
This is the plug I'm talking about with the broken clip. Plugs directly into the ECU. Is this the same one you are referring to? If so where should I be looking exactly for bad connection?
|
#6
|
||||
|
||||
Every one I have found has either been a loose/corroded terminal in that plug or a break in the harness around 100mm from the plug.
I have fixed about 5 like that already.
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
#7
|
|||
|
|||
Sounds good I'll check it out.
|
#8
|
||||
|
||||
Continuity checks on each wire while wiggling the harness is your best bet.
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
Thread Tools | |
Display Modes | |
|
|