Xtrig bar mounts

[Pinittowinit]

Has anyone tried the xtrig PHDS bar mounts? I'm trying to figure out which ones will mount to the stock triple clamp. 2010 model

[Pinittowinit]

So my Ktm dealer had the hard parts xtrig in stock. Went and checked them out. They mount perfectly with the long bolts provided. Just use the nuts from the oem clamps. Also you must shave off the lip off the bottom of the mount. I ordered the green bushing. My research shows that the green bushings are softer and make all the difference. Full ride report tomorrow.

[shang]

Very curious to hear what you think!

[Pinittowinit]

Well after 5 hours of good action my hand feel great. Like I never went ridibg today. Now in all fairness I could of just had a great day but I do believe the mounts work. Just felt smooth today. I did order the "green" soft bushings as I have read that they make the most noticeable difference. I think they are worth the coin. I'm riding next weekend for two days so I can test them more. Hopefully the green bushings will arrive before next Saturday.

[Pinittowinit]

Ok had a nice 5 hour ride today with the green bushings. They do make the world of difference. I notice it most now when I hit a rock your log. Anything for that matter. The hit is much smoother in the bars. I decided to get the mounts first because the mounts are 180.00+40.00 for the bushings. That's 150.00 cheaper than flexx bats and the flexx bars you have to buy their guards ect. I was pleased with my bar and handguards setup so the choice was obvious.

I will without a doubt keep these mounts as one of the goodies you keep to swap to your next bike. Aloha