electric start on older bikes?

[lonetree]

is it possable to put a e start on an non estart engine? what parts are different? i have a 09 250r and since my knee injury, i may have to look into this.
thanks

[gasgasman]

Yes. The kit comes will all the necessary parts. Subframe,harness, starter, etc.

[(F5)]

I know nothing about this but was told the real old cases had provision as e start on the quad, but that recent cases didn't have provision but that was reinstated on current cases.

Just should clarify. again I have not looked at it.

[gasgasman]

http://www.gasgasrider.org/forum/showthread.php?t=8309

[gasgasman]

Here's a better link for the e-start kit.

http://www.ktm-parts.com/EE855002510.html

[(F5)]

glad I started with the preamble I did. I'll have to mention it to my source if I see him.

[hawaiidirtrider]

Thanks for the links and info!!!

[guijs]

I have a 2001 EC250. I have found this electric start kit that fits all bikes from 1996 and newer.

http://www.ktm-parts.com/EE855002510.html

But they say that bikes before 2006, which is my case, need the rear fender and seat. Could someone please clarify what that means? Do I need a different rear fender and seat than the stock ones on my 2001 bike? Maybe from a newer model?

[Elvis74]

A friend of mine has build the electric start on a 1999 EC300. The kit fits, but for the older bikes you need a spacer of about 2mm for the power valve cover, to align the motor to the bendix. For the motors with counter shaft you must close a small gap between cover and motor.


Send from iPhone using Tapatalk

[Zman]

Thank you that is good to know!