|
|
|||||||
| Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
 |
|
|
Thread Tools | Display Modes |
|
#1
07-13-2008, 07:17 PM
|
||||
|
||||
ltr chain guide adapter
just finished my diy xr chain guide adapter!
took me 2 hours and all the material i used was about 10 inches of 1" angle iron. simple plan was 1take xr adapter, remove puck/mounting bolts. 2place angle iron over mounting bolt holes, with the angle going inside, over the top. mark the ends, cut and save. 3then, place iron back on xr guide, mark hole locations and drill. bolt the iron to the mount, you will notice the sprocket slot is blocked p3 4 cut off the portion in the way (i just eyeballed it till i have a chance to clean and paint) 5 take the piece that was cut off original length, and cut it into two peices, down the middle at the angle=2 pc flat iron. 6use gg chain guide as a template to mark holes on one peice of the flat iron, and cut to mount width on swingarm. 7 now take another piece of flat, and make an identical piece as in step 6, but dont drill holes. 8 weld p6 and p7 together butt to butt. 9place p3 onto chain, and bolt p6/7 to swingarm. 10 mark where the two meet, remove all parts 11 weld parts 6/7 to part 3, with the bolt holes vertically inline. weld to the edge along xr guide centerline. obviously theres a little finangling to get a perfect fit, but this was a $2 (already had xr guide) alternative to the ltr kit which is $65 (sorry ltr guys, just couldnt afford it) at this moment its all raw steel, and rough, but once ive cleaned up the welds, rounded the edges and painted it, ill post pics.
__________________
Le Crutan  98 ec250 sixdays, doma, eline pipe guard, zokes shivers from a cr250,fredette racing chain slider, protaper withbarkbusters (SOLD)  FOR THE SECOND TIME 07 EC300 polisport headlight, acerbis taillight ltr pv cover and case saver,trailtech endurance,120z fww, g2 throttle,xr chain puck:
Last edited by mountain thumper; 07-14-2008 at 01:45 AM. Reason: more measurements 
|
|
#2
07-13-2008, 08:55 PM
|
|||
|
|||
no pics???
|
|
#3
07-14-2008, 03:26 AM
|
||||
|
||||
|
ghetto blu prints
heres my ghetto kindergarten blueprint for my guide
dont have a cad program sorry 
__________________
Le Crutan 98 ec250 sixdays, doma, eline pipe guard, zokes shivers from a cr250,fredette racing chain slider, protaper withbarkbusters (SOLD) FOR THE SECOND TIME 07 EC300 polisport headlight, acerbis taillight ltr pv cover and case saver,trailtech endurance,120z fww, g2 throttle,xr chain puck:
|
|
#4
07-16-2008, 06:29 PM
|
|||
|
|||
|
Hey not bad .. I can almost understand what you did!! i wish i could weld ... never mind that ... I wish i had a place for a welder!!
|
|
#5
07-16-2008, 06:59 PM
|
||||
|
||||
|
Quote:
http://sketchup.google.com/
__________________
2004 GasGas DE250
|
|
#6
07-17-2008, 01:07 AM
|
||||
|
||||
|
__________________
Le Crutan 98 ec250 sixdays, doma, eline pipe guard, zokes shivers from a cr250,fredette racing chain slider, protaper withbarkbusters (SOLD) FOR THE SECOND TIME 07 EC300 polisport headlight, acerbis taillight ltr pv cover and case saver,trailtech endurance,120z fww, g2 throttle,xr chain puck:
|
|
#7
07-17-2008, 07:35 AM
|
|||
|
|||
|
Nice...
I love those ghetto drawings.
__________________
Ross '05 MC 250 '91 Husky 610wxe '04 Duc M800 R.I.P '06 Duc S2r 1000 R.I.P '07 Duc S2r 1000 still rubber side down... ---------------------------------------------------------- May be so... May be not so... My Website
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Chain Guide? | Boomhauer | Enduro Chassis & Body | 6 | 06-16-2009 09:29 PM |
| Chain guide | Skidad | Enduro Chassis & Body | 5 | 10-24-2008 01:17 PM |
| chain slider / chain guide crossover? | bondo | General Discussions & Announcements | 1 | 09-01-2008 09:13 PM |
| chain guide set ups | skid jackson | General Discussions & Announcements | 10 | 07-31-2008 05:29 AM |
Linear Mode
