2011 brake pads and air filter???

[mikemoto]

So i ordered new brake pads for the 2011 and an air filter, Both for a 2000 honda cr. The rear pads are not the same, and I havent taken the air filter out of the bag yet so not sure if that will work. Does anyone know what pads cross over, and if the air filter will work? The rears I ordered are 0918-11 and the front are 0934-12 the air filter twin air 150206 honda 2000-2001

[thumperrider1]

I used the same EBC front pads that come on the KTM,Honda, Yamaha I believe. I've not tried to order rears yet. I just took my pads up and we matched them up.

[twowheels]

Originally Posted by mikemoto

So i ordered new brake pads for the 2011 and an air filter, Both for a 2000 honda cr. The rear pads are not the same, and I havent taken the air filter out of the bag yet so not sure if that will work. Does anyone know what pads cross over, and if the air filter will work? The rears I ordered are 0918-11 and the front are 0934-12 the air filter twin air 150206 honda 2000-2001

Mike: That would have worked up until about 2009 when the GasGas got a new rear caliper. You can cross them over to a newer Yamaha I think. I've got them in stock in any case.

Also not sure about the filter because the GasGas piece locates on three posts. TwinAir makes the OE filter and they are available pretty easily. Now if you were trying to cross over a 2012 filter, well hat would be another story

[gasgasman]

The rear pads are for 2009 on up Jap MX bike.

[rosco]

Front and rear pads are the same as a 07 YZ250. I am sure there are alot of other models that will match up as well, but I know this one will for sure.

[TNT Cycle]

Air Filter should work fine thats what most use...it will only have one locating pin hole but it works the same.

Rear pads should be current Yamaha/Kawasaki. Not all Jap bikes because Honda at least uses a smaller caliper with small back brake pads. Fronts should be all Jap MX bikes I think