|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
piston question
im needing to freshen up my 2011 six days 300 a little and i was wanting to replace the piston and rings. what piston are available?? wiseco? vertex?
|
#2
|
||||
|
||||
Vertex makes pistons for the gasser
http://www.na.vertexpistons.com/
__________________
Gas Gas EC 300 '07 dare I mention? KTM EXC400 |
#3
|
|||
|
|||
I dropped wossner in to my -11's throat. 2 earlier were original S3 and lasted 40hours and 60 hours. After that so loud piston slap both times thay I thought my bearings have failed... Hope to that wossner lasts longer. I've allways used good premix oil, clean airfilter, proper jetting etc...
Must be something wrong in those oem pistons... my bike has now 125 hours in it and there shouldn't be need for piston change at these hours...
__________________
There is no such thing as bad weather! Only riding gear is improper or insufficient When it hurts you know you're allive! Gas Gas EC 300 Factory Racing 2012 - Ohlins TTX both front and rear - Rekluse Core EXP 2.0 + Rekluse clutch basket - Scalvini full exhaust system - S3 Head - Trusty adjustable PV cover That was ultimate setup for me... Now trying something else for a while... Last edited by GasTimppa; 03-07-2012 at 02:15 PM. Reason: typo |
#4
|
|||
|
|||
S3 is Vertex
Woessner and Vertex have the same quality and look very similar Athena is Vertex and Woessner I would try Wiseco.
__________________
4 strokes are only good for power generators |
#5
|
||||
|
||||
Quote:
I found the same thing with my S3/Vertex branded stock one. By 75 hours it sounded like death. The Wossner is now at the same hours again and sounding good still. Strangly the Vertex had very little blow by. Rings were still well in spec, and only minor wear on the skirt. Just noisey! |
#6
|
|||
|
|||
Quote:
__________________
There is no such thing as bad weather! Only riding gear is improper or insufficient When it hurts you know you're allive! Gas Gas EC 300 Factory Racing 2012 - Ohlins TTX both front and rear - Rekluse Core EXP 2.0 + Rekluse clutch basket - Scalvini full exhaust system - S3 Head - Trusty adjustable PV cover That was ultimate setup for me... Now trying something else for a while... |
#7
|
|||
|
|||
I swapped out my original from my 2005 with a Vertex. It had the dreaded slap after a little over 60 hours. I put a Wossner in last spring with fingers crossed that it will last until my 2012 gets here in April.
|
#8
|
|||
|
|||
im still having some trouble finding a piston. Wiseco says they dont have one for a 2011 300, and vertex only lists them up to 2007 and Vertex only list them up to 2009.
|
#9
|
||||
|
||||
Quote:
Wiseco part # 850M07200 @ $206.62 in stock - http://wiseco.com/ProductSearch.aspx GoFasters part # WIS300 @ $199.99 is $7 cheaper for same kit http://www.gofasters.com/productdeta...atalogId=-2231 Vertex part # 22981B @ $180.00 but out of stock http://www.na.vertexpistons.com/Prod...x?item_id=5459
__________________
Fred Overstreet 2010 EC250 SixDays 2004 GasGas EC300 -Sold to a good home 2006 GasGas EC250-Sold to a good home 2006 GasGas TXT 280 Pro Last edited by Fred1956; 03-08-2012 at 10:29 AM. Reason: spelling |
#10
|
|||
|
|||
GREAT! thanks for the help.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New or Used 200 Piston question | Algieo | Enduro Engine - 2 stroke | 0 | 11-30-2011 04:00 PM |
Piston question with a long preamble | DaveJ | Enduro Engine - 2 stroke | 6 | 08-08-2009 11:10 AM |
250 piston???? | cvl05 | Enduro Engine - 2 stroke | 1 | 06-14-2009 09:51 PM |
Vertex Piston Question | FFRDave | Enduro Engine - 2 stroke | 1 | 10-31-2007 09:09 PM |
Piston | Elvis74 | Enduro Engine - 2 stroke | 5 | 01-14-2007 01:08 PM |