|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Impossible to remove tail light on 2012?
I don't need the lights and the previous owner bought the bracket and front CRF numberplate. So I was looking at just removing all the lights and the wiring just to get it off the bike and keep from tearing it all up racing it. It doesn't appear that the tail light is coming off. Seems as if it is molded into the rear subframe. Anyone manage to remove the rear tail light?
__________________
Blanco Current ride: 2009 WR450 Previously owned: 12 Gas Gas XC300R, 06 WR450, 06 YZ250, 05 Gas Gas EC250, 05 KTM 450EXC, 02 KX250 w/EG310 kit, 03 YZ250F |
#2
|
||||
|
||||
Quote:
Any chance you want to sale the tail light?
__________________
2012 - XC 300 Racing Seattle, WA |
#3
|
||||
|
||||
Ahh, sweet. Thanks Stu.
No not selling. Will put back on when I go to sell it in the future.
__________________
Blanco Current ride: 2009 WR450 Previously owned: 12 Gas Gas XC300R, 06 WR450, 06 YZ250, 05 Gas Gas EC250, 05 KTM 450EXC, 02 KX250 w/EG310 kit, 03 YZ250F |
#4
|
||||
|
||||
Just for the record, yes you can remove "just the tail light" by following the above procedure. However, you can not remove the little "mud flap" to make it look MX. It is molded into the underneath fender support. So I left the light in bc I didn't want a big hole left.
__________________
Blanco Current ride: 2009 WR450 Previously owned: 12 Gas Gas XC300R, 06 WR450, 06 YZ250, 05 Gas Gas EC250, 05 KTM 450EXC, 02 KX250 w/EG310 kit, 03 YZ250F |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Remove valve cover - Impossible [450 SFE -05] | luzt | Enduro Engine 4 stroke (including EFI & Exhaust) | 2 | 02-18-2013 06:52 AM |
Rear Tail Light | C-UK | Enduro Chassis & Body | 2 | 06-22-2011 11:40 AM |