WTB: Clutch Master cylinder. (push rod housing)

[slocalspode]

Looking for a spare, used, new SLAVE master cylinder, (the one on the motor),
for a friend.
I believe all years are the same, but, his bike is a 1998 EC250 for reference.
I guess he broke off one of the mounting tabs.
Thanks, JJ

[AZRickD]

I have one. Somewhere in my garage.

[swazi_matt]

is the master the one on the engine or the bars? My logic always made me think the master tells the slave what to do ==> Lever tells the engine what to do

I have never known for sure, but if i am correct you may find what you are looking for quicker

[Jacob 'Berg]

Originally Posted by swazi_matt

is the master the one on the engine or the bars? My logic always made me think the master tells the slave what to do ==> Lever tells the engine what to do

I have never known for sure, but if i am correct you may find what you are looking for quicker

Master is on the bars, slave is bolted to the case.

[GGRider01]

You're right. Like the fact that the slave cylinder is located inside the bell housing on my 5 speed Ranger pickup. The master is attached to the foot pedal. Same concept.

[slocalspode]

Thanks everyone for correcting me. I feel so much better knowing the
correct terminology. I am getting old, maybe I just forgot...
Cheers. Jeff
BTW, My friend ordered a new one from G'Fastes.