#11
|
|||
|
|||
Does Magura make a LHRB system?
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
#12
|
||||
|
||||
Quote:
There is a lot of discussion about it on KTM Talk.
__________________
2012 - XC 300 Racing Seattle, WA |
#13
|
||||
|
||||
Quote:
Of course the rear master cylinder isn't designed to take the brake pressure in its reservoir (window and all), and I do not think the Rekluse design intends to use it that way either. There should be a o-ring at the bottom of the part that you insert into the rear master cylinder. At least this was the case with the previous dual action design (where you used the clutch master for the rear brake). This o-ring seals off the pressure, so that the pressure from the left hand master cylinder is routed into the rear master cylinder's high pressure circuit. Could it be that the o-ring is missing or leaking, or that the length of the insert is wrong for the actual rear master cylinder? I have been playing with the idea of building a similar system for my bike, so if you could give me a link to the Hope (or other make) radial master cylinder that Rekluse use, I would be grateful.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#14
|
|||
|
|||
It's actually a "Hayes" lever. Google Hayes trail disc brake. They have several version trail, pro and stroker and you can choose black or white also. I went with a white to be a bit different . Plan is to have a custom braided line and fitting eliminating the rear brake lever(tired of replacing them)
|
#15
|
|||
|
|||
Quote:
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
#16
|
||||
|
||||
Quote:
It's a "Hayes" not a "Hope" master, rekluse are using, The Stroker Trail master: http://www.chainreactioncycles.com/d...l/rp-prod19989
__________________
Henrik Schmidt Faster, Faster!! Until the Thrill of Speed, Overcomes the Fear of Death.. Team YamaGas Racing. http://bricksite.com/teamyamagasracing |
#17
|
||||
|
||||
Good find on the Hayes Mtn Bike master cylinder.
I really like the slim style of this and how it does not take up much space at all. But my concern is that it will not be able to operate my new LHRB setup that uses a daul piston KTM 950 Brembo Rear Caliper. I am currently using a KTM Brembo Clutch Master Cylinder to operate my caliper. It provides plenty of braking power that only a slight grip of the lever and the brakes are there! I currently still have my Magura clutch installed but it makes for a very messy left side of my handlebars. I honestly don't think I have a need for my clutch but am still keeping it for a safety precaution...
__________________
2012 - XC 300 Racing Seattle, WA Last edited by StuJohnson; 09-09-2013 at 05:43 PM. Reason: fix photo |
#18
|
||||
|
||||
To answer your question.
Yes they do. And so does Brembo. They are made to be used on stunt bikes. But with this type you have to add a small brake fluid reservoir and they are very expensive. http://www.haibikeshop.com/index.php...03mplilt717gt5
__________________
2012 - XC 300 Racing Seattle, WA |
#19
|
|||
|
|||
rekluse installs an 1/8" spacer to increase the fluid capacity in the Hayes
__________________
2006 GasGas EC300 2011 KTM 300XC |
#20
|
|||
|
|||
Quote:
I like that caliper! I'll take a look at your link for the Magura master cylinders.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
LHRB with standard Clutch lever/cylinder | stay_upright | Enduro Chassis & Body | 5 | 09-07-2013 05:45 PM |
rekluse ??? | Moto-x | Enduro Engine - 2 stroke | 1 | 03-05-2013 02:54 PM |
Rekluse EXP 2.0 for Gas Gas? | AZRickD | General Discussions & Announcements | 13 | 05-25-2011 06:44 AM |