|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
dogbone bearings shocking prices from gasgas uk so couple questions
hi all got my frame and swingarm back from powdercoat,rang gasgas uk for 2 bearings and 2 oil seals for where the dog bones connect to the swing arm,to be quoted a supidly high price of over 40 pounds for 2 bearings and 2 seals,i have managed to find a supplier for the bearings with the same code for 2 pounds odd each but no oil seals. they do however sell o rings in the same size could i use these instead of the original type seals thanks Adam.
|
#2
|
|||
|
|||
Off Road Only in Wales do a linkage bearing kit for about ?50 which has all the bearings (maybe 8 or 9 of them), pins and proper oil seals, which I think work better than the 'o'ring seals.
Might be worth a try.
__________________
Gas Gas EC 300 '06 BMW F650 |
#3
|
|||
|
|||
hi forgot about off road only thanks for that,i have already replaced the linkage bearings,so only needed the 2 for the bottom of the swingarm as i had to remove them before powdercoating,i'll try off road only for the correct seals as i brought the bearings today.
|
#4
|
||||
|
||||
IMO, the orings are better as they provide a tighter seal. I go a full season now without a linkage service, and its fine when I do tear it down. Buy them in bulk cheap and your set for a long time.
|
#5
|
|||
|
|||
thanks for the info fitted them with the orings this morning, got the whole lot bearings and o rings for around 6 pound
|
#6
|
|||
|
|||
knuckle bearings and seals
We will be releasing our own bushings and seals very soon. Please stay posted. Rob
__________________
www.synergyseals.com 209-938-9726 Being BOLD is BOLD! However, being confident is certain! Ride with confidence again! Made in the USA |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2011 300 six days handle bar shocking | matt_tidball | Enduro Electrical & Wiring | 3 | 02-02-2011 09:36 PM |
Couple of Questions | gascanuck | General Discussions & Announcements | 4 | 11-04-2009 09:01 AM |
A couple of questions | moto9 | Enduro Chassis & Body | 2 | 04-27-2009 12:27 AM |
2009 GasGas Prices! | Mark Berg - CPD | General Discussions & Announcements | 4 | 11-15-2008 09:23 PM |