GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-01-2008, 05:55 PM
loganlexow loganlexow is offline
Member
 
Join Date: Jan 2008
Posts: 6
Default Wheel X-over

Hey Guys,

This is my first post and first Gas Gas. I am super excited, however, I am curious about wheels. I plan on converting my 01 EC250 over to supermoto but want to save my stock wheels for trail riding. I have searched on here and so far the consensus is that the hubs are Gas Gas specific. I found that Moto520 converted a rear KTM wheel using the Brembo brakes, but he did not say anything about the front wheel or whether the stock brakes would work. Is there any help on this or am I stuck lacing my stock hubs? Thanks very much for your help!

Logan


Reply With Quote


  #2  
Old 02-01-2008, 07:24 PM
MattR's Avatar
MattR MattR is offline
Super Moderator
 
Join Date: Jul 2006
Location: Temperance, MI
Posts: 958
Default

Why not purchase the GasGas supermoto wheelset?
__________________
Matt
Current: 2009 Yamaha FZ1
Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165
Reply With Quote
  #3  
Old 02-02-2008, 01:42 AM
loganlexow loganlexow is offline
Member
 
Join Date: Jan 2008
Posts: 6
Default

First, that would make too much sense. And second, I can't get them through my work unfortunately.
Reply With Quote
  #4  
Old 02-02-2008, 11:52 PM
Link Link is offline
Member
 
Join Date: Aug 2007
Location: Petaluma Ca.
Posts: 80
Default

No your not stuck lacing your stockers Talon (UK) makes sick looking hubs for the Gassers.
Reply With Quote
  #5  
Old 02-03-2008, 12:06 PM
slocalspode's Avatar
slocalspode slocalspode is offline
Senior Member
 
Join Date: Mar 2007
Location: Southern Kalifornia
Posts: 390
Default

Would you have a link or a part # for the Talon (UK) GasGas hubs?
I have my 98 EC250 set up for the street using 21" and 19" Dunlop
K180 Dirt Track tires. Some day I would like to go with 17"s and some
wide tires.
Cheers, Jeff
Reply With Quote
  #6  
Old 02-03-2008, 12:35 PM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

GasGas hubs (AJP) are very reasonable, and I have never heard of one breaking in my 7+ years on the bikes. Check this out before going aftermarket.
Reply With Quote
  #7  
Old 02-04-2008, 01:16 AM
loganlexow loganlexow is offline
Member
 
Join Date: Jan 2008
Posts: 6
Default

Well, I just found out that the rear wheel from a Cannondale will fit with no modifications! That means that (though I don't know from personal experience--just from what I have read) a Honda CR250R wheel should fit. The front wheel does not fit. The spacing is too narrow and will have to have spacers made to fit. The axles are the same diameter.
Reply With Quote
  #8  
Old 02-04-2008, 09:50 AM
slocalspode's Avatar
slocalspode slocalspode is offline
Senior Member
 
Join Date: Mar 2007
Location: Southern Kalifornia
Posts: 390
Default

Where, (whom) would you source AJP wheel hubs from in America?
http://www.ajpamerica.com/
This is the only source I am aware of.
Jeff
Reply With Quote
  #9  
Old 02-04-2008, 12:05 PM
MattR's Avatar
MattR MattR is offline
Super Moderator
 
Join Date: Jul 2006
Location: Temperance, MI
Posts: 958
Default

GoFasters website has the parts diagram with prices listed. They show prices for both front and rear AJP hubs. Like Glenn mentioned, they are reasonably priced. I don't want to post GoFasters prices since they subject to change based on currency rates. Please visit their site for prices.
__________________
Matt
Current: 2009 Yamaha FZ1
Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165
Reply With Quote
  #10  
Old 02-04-2008, 02:03 PM
slocalspode's Avatar
slocalspode slocalspode is offline
Senior Member
 
Join Date: Mar 2007
Location: Southern Kalifornia
Posts: 390
Default

I guess I better call GF'rs. I can't find a parts diagram with the price
listed... I looked at their "Enduro Parts" section and some of the
bikes show a diagram such as this one:
http://www.gofasters.com/index.php?m...ath=65_383_662
But nothing about part #'s or prices.
Tried a search on 'AJP' with no results found. Doing a search on
'wheel hub' did find a couple hits. For a newer FSR bike.
I am looking for the AJP or equivalent hub for a 1998 EC250. I want
to string up a SuperMoto set of spare wheels.
I guess, spend a dime on a phone call and save a dollar of frustration.
Thanks, Jeff
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Will anything other than a GG rear wheel fit on a GG? cal_tony Enduro Chassis & Body 7 10-03-2013 12:20 AM
Will anything other than a GG front wheel fit a GG? cal_tony Enduro Chassis & Body 7 11-08-2008 10:21 AM
Need a wheel for 99 EC300... ricegas Enduro Chassis & Body 4 10-20-2008 08:54 PM




All times are GMT -5. The time now is 01:43 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org