|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Jetting help please!
Hi All, I am the proud new owner of a 2013 XC300, but am having trouble getting it to run properly. It didn't run too well on my short test ride before purchase, but bike seemed solid. I took it for a longer ride and it ran strong on the pipe at wider throttle positions, but burbled down low, I also heard some detonation on a light throttle. I pulled the jets to check everything, original 42 pilot was partially blocked, I swapped in a new 40, main was ok. I put in a new BR8EG, new air filter, new 94 octane 50:1. I am at 3000', temp was 15c (60f) it now runs worse. I have a N1EF on 4, 40 pilot and a 168 main. Any suggestions on which way I should go would be gratefully accepted, thanks.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A Few Jetting Basics (ie Jetting 101) | n_green | Enduro Intake/Carburetion - 2 stroke | 8 | 05-23-2014 05:42 PM |
300 jetting | adv rider | Enduro Intake/Carburetion - 2 stroke | 9 | 01-27-2014 11:52 PM |
How do you know you got your jetting right ? | Krisden | Enduro Intake/Carburetion - 2 stroke | 21 | 07-01-2012 03:49 PM |
Need help jetting an 06 EC 250 | piperpilot12w | Enduro Intake/Carburetion - 2 stroke | 3 | 11-16-2008 11:19 PM |