Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.

Thread Tools Display Modes
Old 07-22-2007, 06:01 PM
Simon_R Simon_R is offline
Join Date: Jul 2006
Location: Australia
Posts: 2
Default broken clutch??

Hi all
was out for a ride yesterday when my not very old or worn front sprocket decided that it would strip half its teeth. One of the remaining teeth then instead of going in the gap between the rollers went through one of the rollers, resulting in the chain jammed up against my LTR case saver which locked up the back wheel and stopped the bike immediately. As the bike stopped I heard something crack, presently the clutch lever will not pull in at all and is locked solid, and the bike will kick over like its in neutral, however it is in about 3rd or 4th gear.

I will clean the bike up next weekend and start pulling it apart to have a look at what damage has been done.

what could have broken in the clutch or gearbox that would lock the clutch lever up and let the bike turn over while still in gear??

Reply With Quote

Old 07-22-2007, 09:07 PM
Cruiser Cruiser is offline
Senior Member
Join Date: Jul 2006
Location: Jim Thorpe Pa
Posts: 1,280

Probably the slave cylinder is damaged and the piston is jamed, causing the locked lever..
Reply With Quote
Old 07-23-2007, 05:50 AM
GMP's Avatar
GMP GMP is offline
Senior Member
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597

Maybe damaged in a way that put pressure on the actuator rod, causing the clutch to be disengaged. Just hope the cases did not crack.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
broken clutch plates? stainlesscycle Enduro Engine - 2 stroke 24 09-27-2011 04:39 AM
Broken Radius noobi Injury & Recovery 23 08-28-2010 02:11 PM
Broken Clavical GMP Injury & Recovery 68 06-17-2009 07:09 AM
Broken Link Dingo Enduro Engine - 2 stroke 3 07-07-2007 07:15 PM
Anyone else ever broken an air screw? lukachuki Enduro Intake/Carburetion - 2 stroke 16 03-12-2007 07:43 AM

All times are GMT -5. The time now is 12:14 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org