Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #11  
Old 05-19-2008, 06:47 AM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

The same V2M05 is used on the Husky CR/WR 250 OEM. The new Huskys may have gone to the VF3 but there should be plenty of VF2s around in parts stock or possibly available for trade.

We recently modified my brothers Husky WR250 with VF2 reeds in low tension position, RBD head mods, and a Keihin PWK 38AS to replace the Mikuini. Bike runs real strong, much more off the bottom.


Reply With Quote


  #12  
Old 01-26-2009, 08:55 AM
joey11 joey11 is offline
Senior Member
 
Join Date: Jun 2007
Location: S. Ohio
Posts: 110
Default Replacement reeds

Dusting off an old thread. Can anyone give me the part # for the replacement petals for the VForce 3. Is it the Honda 250? What year. Thanks.
Below is the part #'s from all the petals on their website.
3P352H -
3P352M -
3P411H -
3P412H -
3P412M -
3P472H -
3P522M -
3P602H -
3P682H -
3P682M -
3P683A -
3P683M -
3P794A -
3P883A -
__________________
2008 KTM 300xc Plated
Reply With Quote
  #13  
Old 02-03-2009, 02:28 PM
gasser250sm gasser250sm is offline
Member
 
Join Date: Nov 2008
Location: Telford, UK
Posts: 79
Default

i have a 2002 EC250 and have the boyesen reed block i have just bought some boyesen pro series dual stage reeds to put in there. standard were the power reeds. i am looking for mid/top end pull, was this the best option ? is there anything else i should have instead to give me mid/top end pull. thanks
__________________
2001 Gas Gas EC250 Supermoto

Boyesen Pro Series Reeds, Messico & Modified FMF TC II, Black Powdercoated Wheels & Hubs, Red Renthal Fatbars, Polisport Handguards, 4 POT Brembo Front Brake W/ Floating Rotor

Want:
Doma,Messico Or 06 GG Front Pipe, RB Carb & Head Mod, DE250, XC250 Or EC200 CDI
(If you have any of these parts PM me!)
Reply With Quote
  #14  
Old 03-12-2009, 01:52 PM
jefgil123's Avatar
jefgil123 jefgil123 is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: Lake Tahoe, CA
Posts: 151
Default

Yes- Like Kent said, look on ebay for a CR250 1990-2001 ?? V-Force II

Also was available for the Honda Quad 250 I think its a TRX 250,
(but you have to file off a bit of the side of it from the Quad one. I did. Fits perfectly.) Did not notice huge gains on the 300......

Jeff



2001 XC300
Reply With Quote
  #15  
Old 03-12-2009, 07:55 PM
gasser's Avatar
gasser gasser is offline
Senior Member
 
Join Date: Nov 2006
Location: Cookeville, TN
Posts: 1,458
Default

Does anyone know where you can still get replacement reed petals for the Vforce 2 reed cage?
Reply With Quote
  #16  
Old 03-13-2009, 02:28 PM
Kent A Kent A is offline
Member
 
Join Date: Jul 2006
Location: ?rnsk?ldsvik
Posts: 38
Default

You need to set the reed tension at low on the VF2 to enjoy its full benefits. Even the slightest adjustment away from the low tension setting will make the VF2 perform similar to the VF3.

Kent A
Reply With Quote
  #17  
Old 03-13-2009, 11:47 PM
gasser's Avatar
gasser gasser is offline
Senior Member
 
Join Date: Nov 2006
Location: Cookeville, TN
Posts: 1,458
Question

Is tension adjustment a matter of moving the bar on the outside of the reed cage? (i.e. moving the bar farther from the reed tips creates lower tension)
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gas Gas 125 power valves geoffg Enduro Engine - 2 stroke 8 10-28-2010 01:23 PM
after market base valves 45/50mm marzocchi armyoforange Enduro Product Announcements 9 01-23-2010 10:58 PM
Reed Advice PLEASE jriley43 Enduro Intake/Carburetion - 2 stroke 1 05-19-2009 07:50 AM
Snapped valves on 02 400 douglase1983 Enduro Engine 4 stroke (including EFI & Exhaust) 3 01-10-2009 01:33 PM
reed spacer? moff747 Enduro Intake/Carburetion - 2 stroke 2 02-26-2008 10:26 PM




All times are GMT -5. The time now is 01:53 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org