|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Stator wires
Hello,
Ec300 2007 stator. Sorting out the wiring on the rebuild and I've no idea where the white wire goes !! Could someone enlighten me please. Sorry about the size of picture, another thing I don't know is how to make it smaller. cheers Bill |
#2
|
|||
|
|||
Assuming your bike uses AC power for everything, the stator white wire is not used. Your working voltage will be ~14VAC between yellow and engine ground. There is a small black regulator that clips AC voltage so you don't blow out bulbs.
The white wire has higher voltage that would supply a regulator/rectifier for creating DC voltage (primarily for battery charging).
__________________
2011 EC250E |
#3
|
|||
|
|||
Hello,
Thank you for the explanation |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What are those two wires for?? | Wilmer | Enduro Electrical & Wiring | 6 | 01-09-2018 07:49 AM |
Help me to identify these wires | djr0bert2003 | Enduro Electrical & Wiring | 2 | 04-04-2017 06:26 PM |
Stator wires on o3 ec300 | Dnf-init | Enduro Electrical & Wiring | 4 | 03-09-2016 04:53 PM |
Extra wires from stator on 2012? | The Angry Chook | Enduro Electrical & Wiring | 1 | 07-25-2014 09:55 AM |
2 unplugged wires ec 250 | dareuk | Enduro Electrical & Wiring | 1 | 03-22-2010 03:59 AM |