Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 12-18-2019, 06:01 PM
Adam500 Adam500 is offline
Member
 
Join Date: Oct 2015
Posts: 56
Default 2000 XC300 rear brake questions

Restoring a beat up 2000 XC300.
It has an aftermarket aluminum rear caliper mount/disk guard made my Scotts.
I seem to be missing the thin steel hardware where the end of the brake pads sit/slide in.
Worse yet the aluminum has worn thru so the pads just spin on the pinned end when the brake is applied.
Where can I get a replacement caliper mount and hardware for caliper?
OEM is fine. does not need to be a disk guard combo.
Are there a parts interchange for Japanese bikes?
I have the ability to weld aluminum and might be able to save the Scotts mount but I need the steel hardware the brake pad sits in.


Reply With Quote


  #2  
Old 12-19-2019, 12:28 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

So this happened to me, the steel clip fell out and the pads wore into the mount. This is an 07 so Nissin brakes.

I got it welded and filed back then put a new clip in it. The clip for a Nissin was the same as a *Honda CR250 and worth a few dollars. Not sure what brakes the 00 has.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #3  
Old 12-19-2019, 06:11 PM
Adam500 Adam500 is offline
Member
 
Join Date: Oct 2015
Posts: 56
Default

thanks for the response.
I successfully welded the caliper mount today.I Just need the steel hardware and a new set of pads.
What year CR250 did you use?
Reply With Quote
  #4  
Old 12-20-2019, 02:07 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

Um. . . I just chose a year, probably 07. It looked the same in online parts fishe so I took in the part number, badabing etc.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2000 XC300 with ohlins questions... Adam500 Enduro Suspension 6 01-23-2020 06:59 PM
restoring a 2000 XC300 Adam500 Enduro Chassis & Body 12 12-19-2019 06:56 PM
2000 xc300 Jeremyxc300 Used Bikes 1 03-17-2014 06:37 PM




All times are GMT -5. The time now is 06:15 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org