|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
front rotor interchange
So I know the rear sprocket on late model 300s are interchangeable with Italian huskies. What about the front rotor?
|
#2
|
||||
|
||||
KTM I think.....
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#3
|
||||
|
||||
None that I know of, ktm rear fits.
__________________
15 GASGAS EC 250 19 Sherco SE 125R |
#4
|
||||
|
||||
Quote:
Give this a look! > http://www.mooseracing.com/products/...umber=17110649
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#5
|
|||
|
|||
Specifically I am looking for a rotor with a hole for a speedo magnet. My OEM doesn't have the hole and the OEM adapter is on backorder for an undetermined period of time
|
#6
|
|||
|
|||
Just epoxy your magnet to the rotor. I did it and have put 75 hours of racing on it and it's still there hangin tough
Sent from my iPhone using Tapatalk |
#7
|
|||
|
|||
Sent from my iPhone using Tapatalk |
#8
|
||||
|
||||
I drilled mine and installed a ktm magnet, not a easy job but very reliable.
__________________
15 GASGAS EC 250 19 Sherco SE 125R |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Front Rotor comes apart | cal_tony | Enduro Chassis & Body | 0 | 06-05-2013 09:54 AM |
Front Rotor Cross Over | alexpp | Enduro Chassis & Body | 1 | 05-15-2010 07:31 AM |
Front Rotor Guard | PEB | Enduro Chassis & Body | 9 | 07-04-2009 03:38 PM |
Aftermarket front rotor | Dave | Enduro Product Announcements | 7 | 01-20-2009 05:52 PM |