|
|
|||||||
| Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
 |
|
|
Thread Tools | Display Modes |
|
#1
02-14-2009, 04:08 PM
|
|||
|
|||
Flexbars
I am really growing to like the flexbars that came with my 07. However they are a little to wide. Looking at them it appears that I can only trim about a 1/4 off each end and still have room for the kill switch and the map switch. Anyone have these bars and if so have you cut them down at all?
paul 
|
|
#2
02-14-2009, 05:55 PM
|
||||
|
||||
|
The "enduro bend" has longer outer tubes just for mounting all your enduro accessories.
You can move the map switch to one of the radiator hoses. Kill switch can go on the inside of the clutch master cylinder mount. Then you can cut that 1/2" off.
|
|
|
|
Linear Mode
